Recent content by Dr.Tim

Remy, We use our JR 9503 Transmitter to take off with (Leave in GPS Mode) then when your up a few feet we engage the waypoint flight from the GCS (Make sure to Load the waypoints before the flight!) You can take over the flight at anytime from the Transmitter by switching from GPS to ATTI .. Now...

We are flying ours on a 550mm quad with 5000mah 3S Pack ... The 900mhz downlink works perfect! We fly the quad up to about 20 feet with the transmitter then switch to the ground Station .. We are using the Netbook Laptop with XP operating system ... We have found it is easier to download your...

Mat, Simply AMAZING !!!

I would reboot the Computer then retry ... Sometimes the drivers and program need to complete the install ..

Just a quick question for you .. Did you PROGRAM the ESC's before trying to fly? I ask because the end points and parameters should all be the same. I had this same issue with a friends quad .. Programming the ESC's solved it. Dr.Tim

I have done this before ... It is one of two things. 1st, check to make sure all your ESC's are in thier proper location. 2nd, Make sure all your control channels are in the correct direction (You may have a channel reversed!) I have done this a few times! :) Stay at it .. Also having a helper...

Here is a short video I did for BLM ... Music SUCKS so turn the sound off!! :) I'm thinking of mixing some NICE music for this video to make it more peaceful. http://www.youtube.com/watch?v=w6qzRr-EXAU&context=C4e6a2c5ADvjVQa1PpcFMh5coDK8vFn0KZdeOJHP2NecAMpxL9m-s= Simple X468 mount .. I use...

Hello everyone, I'm new here but not to the hobby! I am flying with the X468 GoPro mouont on my NAZA and the HD Mount on my Large Quad .. Both are exellent but do require drilling out the pilot holes for the screws. Also everything fits real tight so a little sanding is in order to get a nice...