Recent content by doehme

  1. D

    TH9X battery alarm voltage??

    I've installed ER9X on my TH9X radio. What voltage should I have the low voltage alarm activate at? The radio has a 2600mAh Lipo installed.
  2. D

    Payload release mechanism

    Attached are some photos of my payload release mechanism. I built this quad for 3 reasons 1) - Teach myself how to do build and fly a quad 2) - Too much spare time and an active mind 3) - I'm into Ham radio and wanted a way to accurately put long antenna wires over tall trees and structures So...
  3. D

    MultiWii / NAZE / SP Racing F3 RTH failsafe

    Hi All, What needs to be configured to get MultiWii to acivate RTH mode in the event of lost radio control signal or is this feature active by default? I'm using the HK MW Pro w/GPS. Yours, Dene
  4. D

    GoodLuckBuy Freight Tip

    No Batteries in this lot. Just propellers. Dene
  5. D

    GoodLuckBuy Freight Tip

    Hi there, When getting stuff from GoodLuckBuy, it appears that there is no point paying extra for premium/express freight. I ordered $80 worth of stuff over a fortnight ago and paid an extra $20 (approx.) for "3 - 5 days" delivery. Tracking number doesn't work and still no sign of my parts...
  6. D

    MultiWii / NAZE / SP Racing F3 HK MultiWii Mega Board w/ MTK 3329 only working with MW V2.1

    I recently purchased a HK MultiWii Mega Board w/ MTK 3329 and the only version of firmware I can get it to work fully on is version 2.1. Using Version 2.2 the ACC and MAG don't function Any suggestions? Dene
  7. D

    Getting Sonar to work??

    Hi All, What's the latest with getting a SR04 sensor to work with Multiwii (not MegaPirate) ? I've found a few older threads that sound like there are people people working in it but has anyone got it nailed? If so where can I find some code and instructions? Using the latest HK Multiwii...
  8. D

    Mounting Flight Control Board

    Is it ok to mount my FC board to the frame by just using soft double sided tape in an effort to reduce vibration? Dene
  9. D

    UBEC Required???

    > The Turnigy Plush got a linear BEC built in....this will give you 5 Volts / 2 Amps max, Thanks Chris. That's really all I needed to know. Not running video or any other power consuming gear at this stage. Dene
  10. D

    UBEC Required???

    Hi All, I'm setting up a quad with TURNIGY Plush 30amp ESC's. Should I be running a UBEC as well? Thanks, Dene
  11. D

    Newbie, New build, radio question

    No problem with moving it to this forum. My rationale was that this forum only had 1 thread at the time I posted whereas the other had thousands and therefore a bigger potential audience. Hopefully some of the many users on the other forum will look here now and answer my questions as well...
  12. D

    Newbie, New build, radio question

    Hi All, After years in other areas of RC I've decided to build a quad. I'm thinking a 525 size with room for expansion of capabilities as skills an interest develop. As such I've been planning on a MultiWii PRO Flight Controller w/MTK GPS Module. A bit fiddly to setup apparently but I'm...
Top