Recent content by Booma

Hello group, I have building multirotors for several years now and have had many many packages sent from China to my home in NZ. I like some of the TAROT gear - particularly their worm driven landing gear so I do not mean to bash their products. But what I have found is they are not willing...

5D - 550D Profiles Hi Guys - I am happy to share my profiles. They are work in progress of course - Currently I am working to increase the available tuning band between LF and HF oscillations. You guys know this all ready but these profiles are simply a starting point for your own tuning...

Hi, do you still have any ? Do you ship international ? Cheers

Oh BTW Monty - to lock the horizon I increased the gyro trust to 250

Kloner and Monty - you are right the EPIC will need to be balanced to the mm, that is certainly possible [but fiddly] to achieve even with the standard Epic tray - hopefully Kim will release an adjustable tray if there is enough interest. With the EPIC you might have problems tilting up or down...

Av200 idd test - canon 550d Here is a test I shot yesterday with the 550D and 10-22. https://vimeo.com/79614363 I am getting the gimbal tuned better and have sorted out the issue I was having where the gimbal would roll off when you panned quickly - this clip shows how the...

The Epic is not mounted correctly in that pic - they need to be redone - you are correct it still hangs from the top.

JC - My understanding is that the PH kit will not include Alexmos but will include Maxon motors if you require them. Best check with them directly.

Hi Xero - yes they have the Maxons in stock and they can be ordered as part of the upgrade kit or as part of a complete gimbal. I think the pitch is greatly improved through the roller drive - you just need to be aware that the roll axis is 10:1 gearing and the pitch is 4:1 so you need to be...

Hi Xero I asked Kimberly from Photohigher what Maxons they are and he said that they were manufactured specifically to PH specs - so I guess they do not have a product number sorry. With the tilt you are right , this has been the hardest axis to tune however the roller drive has resolved all...

Images as requested -

Hi Tahoe I will post some pics of the setup when I get a minute. DSLR seem to balance fine, there is just enough width in the tray to allow the camera to be shifted a little to the right and offset the weight of the motor - because of the reduction gears balance is not quite as critical as for...

I shot this clip in less than 20 mins on a Canon 5D2 with an L series 17-40 zoom. A few of the shots were at 40mm, no post production stabilization has been used. https://vimeo.com/79463907 This was a hand held AV200 gimbal with Maxon brushless motors and Alex Moss boards in Follow Me mode. I...

That is an interesting question. short answer is I don't know for sure because those configurations have not been tested yet. I do know this - I am running that test gimbal on 3S and I have not set full power to the motors in the GUI, I believe you can run the Alex Moss boards up to 5S so you...

No worries ; ) With the upgrade I guess it depends on if you require 2 or 3 axis, if you are interested please contact them directly, I dont work for them, I just help them with flight testing as I live in the same town and run four or five MR.