Recent content by AeroVision

  1. A

    Mikrokopter Cinestar 8 always flip on side during lift up

    Hello there, when this happened to me, it was blame to a couple of props rotating the wrong way... Also the vertical alignment should be checked... Ivano
  2. A

    Mikrokopter Graupner vs. Spektrum for MK ?

    Hello there, I have a Graupner MX20 and I find it amazing ! I've been using SpektrumDX7s before, not bad at all, but with spektrum you'll need a serializer... More electronics, more wires, different connections on the FC (I have 2 FC, ready for both...) In my PERSONAL opinion, Graupner:10...
  3. A

    Mikrokopter GR-24 receiver: no signal error

    Hello there, I just received my MX20 back from Graupner (almost 2 months to fix it!) and I've started changing FC connections (I've been using a DX7s for a while) to fit GR-24 wiring. From RX pad on FC to "T" on GR-24 and the 3 cored wire to a servo port The receiver's binding done, green led is...
  4. A

    Mikrokopter Compass always oscillating, can't fly.

    Hi zaGURU, I had the same issue with my hexa... In my case, the cause was RFI/EMI coming from cables... All of the motor cables were passing through the center hole in the plate, same for battery cales and so on... Now all the motor cables comes out og the boom abd go straight to the outer...
  5. A

    Mikrokopter RECOM dc-dc regulator

    The pin out was ok, and the Recom burned out because I didn't use BEC to feed gimbal servos... By the way, from MK.de they told me the ATmega is dead... :-( Waiting for the spare parts... I've bought a new FC :-) Cheers Ivano
  6. A

    Mikrokopter RECOM dc-dc regulator

    Hello there,today I've changed a burned RECOM with an equivalent LM7805,1A. As soon as I started the copter, a loooong beeping came out from the buzzer (I had to turn it off). All the remaining starting beeps are as usual. Everything looked nice (except for the beeeeeeeeeeeeeeep) and, when I...
  7. A

    Hello from Italy

    Hello there, I'm a biomedical engineer, 44 yo, fond of RC since I was a kid. I live in north of Italy and I just built my first hexa. Droidworx frame AD6-HL, FC 2.1ME, Navi 2, GPS. TX is a DX7s with rx AR8000 (and a serializer), motors are QC3528, props CF 12x4.5 Next one is gonna be a Y6, cnc...
  8. A

    Mikrokopter I'm sorry, Are these things supposed to fly?

    Strange behaviours Hello everybody, I'm new here, and I was reading some posts when I saw this thread... Well, I had a similar crash, couple of weeks ago, and I've realized that the problem (in my case) was mostly due to EMI... Now I weaved all the small wires around, took off all the motor...
See more
Top