Prior to wiring this unit in I decided to check the voltage on the video output ribbon which has twin POS and NEG wires (for twin TXs?).
I connected the OSD up to a charged 4S LiPo and read 16.65V ... This is too high to feed my 5.8Ghz 200mW Tx which like many others uses 12 to 15V
Anyone got any ideas?
I connected the OSD up to a charged 4S LiPo and read 16.65V ... This is too high to feed my 5.8Ghz 200mW Tx which like many others uses 12 to 15V
Anyone got any ideas?