Droidworx 8 + dj WK opinions and configurations

[Pablo74]

Hello everyone, I'm new on this forum, I live in rome italy and I'm sick of multirotors
Then come to us.
Are possessor of two mikrokopter and to date
we are finishing my partner and I arranged a droidworks 8 with a home made 360 cam mount
engines axi 2814/22
60A Opto ESC HobbyWing funfly
13x6.5 apc prop for the moment
DJ WK

We should be ready to fly on 5kg with 2 x 4s 4000
and sony 730.
I wish I had some of your opinion on the esc and any measures since we are approaching now the wookong.
Thanks to all
a greeting
G.

 

[Sebas600]

Hi,

View attachment 4366

Your motors could burn up in windy situations.
Takeoff weight will probably be more like 6000 gram

View attachment 4367

 

[Pablo74]

I hope I never get to those weights, however, will make you know. thanks for sharing your opinion

 

[Sebas600]

My HL-AD8 with only extended landing gear and AV200 and smaller 40amp esc and 2x 5s 4000mah was 5400 gram without camera

 

[Pablo74]

how many gams 5s 4000?
i look great and much efficient maxamp 11a 4s 820gr
but 300$

 

[Sebas600]

? English plz ;-)

 

[Macsgrafs]

I fly a Droidworx SJ8 with emax 2820/07 motors & 60A ESC's from hobbyking. I also use nanotech 4S 4000ma lipos...works well, plenty of power & have never been above 80% throttle!!!!! I also use APCE 12x6 props.

Ross

 

[Pablo74]

My HL-AD8 with only extended landing gear and AV200 and smaller 40amp esc and 2x 5s 4000mah was 5400 gram without camera

sorry for my English! weight in the 5s 4000? I have seen on the maxamps.com 4s lipo 11000mha 820gr and are very effective compared to other lipo, said a friend, but they cost $ 300

 

[Pablo74]

I fly a Droidworx SJ8 with emax 2820/07 motors & 60A ESC's from hobbyking. I also use nanotech 4S 4000ma lipos...works well, plenty of power & have never been above 80% throttle!!!!! I also use APCE 12x6 props.

Ross

hi Ross thanks for your information
do you have tried pro 13? i think Perhaps you'd better efficiency and more payload

 

[Macsgrafs]

hi Ross thanks for your information
do you have tried pro 13? i think Perhaps you'd better efficiency and more payload

To be honest with you I havent tried 13" props yet! I find the response to be a touch slow even with 12" props

Ross

 

[Pablo74]

great, seeing the evidence of ecalcrc, 13x4 actually going to be able to sit still in the margins of axi motor amperage for me but going up as you could pitch a little ...
Thank you all for your information really very nice

 

[mbsteed]

Your motors could burn up in windy situations.
Takeoff weight will probably be more like 6000 gram

/QUOTE]


How do you figure that it will burn out a motor? I don't trust eCalc, it never made any sense when I put my specs into it, I don't think it is setup properly for multicopters. I don't think those will burn up. In fact that is a recommended configuration for this type of setup.

 

[Pablo74]

for me its time of flight has always guessed the algorithm based on the parameters ecalc for me at 99%, a little less on the absorption, but is very close to reality.