Nov8er
Member
Hello to the community. I've finally put together a list of parts that I think would make a decent multirotor quad. If anyone sees an easier way or an error in the build tell me because I am new to making quads. I am trying to successfully build a heavier mid-sized racer with a decent battery life of 10 min. Here it is:
#1 (Battery) - Turnigy nano-tech 3000mah 3S 25~50C Lipo Pack >> http://www.ebay.com/itm/Turnigy-nan...adio_Control_Control_Line&hash=item35dc42d4e1
#2 (Motors) - 4x A2212 1000Kv Brushless Outrunner Motor >> http://www.ebay.com/itm/4x-A2212-10...Control_Parts_Accessories&hash=item4ae2d9e70b
#3 (Propellers) - 8x Three 3-blade 7045" 7x4.5 Props >> http://www.ebay.com/itm/8x-Three-3-...Control_Parts_Accessories&hash=item46094ed9fb
#4 (Electronic Speed Controllers) - 4x HobbyFans Brushless Motor 30A (ESC) >> http://www.ebay.com/itm/4x-HobbyFan...Control_Parts_Accessories&hash=item4624088b56
#5 (Flight Controller) - CC3D Openpilot Open Source Flight Controller Side Pin >> http://www.ebay.com/itm/CC3D-Openpi...Control_Parts_Accessories&hash=item19f52b7826
#6 (Radio and Receiver) - FS FlySky FS-i6 2.4GHz RC Helicopter Transmitter & Receiver 6ch >> http://www.ebay.com/itm/FS-FlySky-F...Control_Parts_Accessories&hash=item3f402381c0
#7 (Custom QuadFrame) - All aluminum and zip-tie constrained. Foam in lining for smooth shock absorption. Rollcage style frame to guard electrical equipment from sudden impacts.
*Weight Without Gear Only Frame: <roughly - 6.24oz or 177g>
*Weight With Gear and Frame: <roughly - 1.5lb or .68kg>
As for now it has no FPV gear. I'm just needing to know if this will fly. Any advice or constructive criticism would be very appreciated.
#1 (Battery) - Turnigy nano-tech 3000mah 3S 25~50C Lipo Pack >> http://www.ebay.com/itm/Turnigy-nan...adio_Control_Control_Line&hash=item35dc42d4e1
#2 (Motors) - 4x A2212 1000Kv Brushless Outrunner Motor >> http://www.ebay.com/itm/4x-A2212-10...Control_Parts_Accessories&hash=item4ae2d9e70b
#3 (Propellers) - 8x Three 3-blade 7045" 7x4.5 Props >> http://www.ebay.com/itm/8x-Three-3-...Control_Parts_Accessories&hash=item46094ed9fb
#4 (Electronic Speed Controllers) - 4x HobbyFans Brushless Motor 30A (ESC) >> http://www.ebay.com/itm/4x-HobbyFan...Control_Parts_Accessories&hash=item4624088b56
#5 (Flight Controller) - CC3D Openpilot Open Source Flight Controller Side Pin >> http://www.ebay.com/itm/CC3D-Openpi...Control_Parts_Accessories&hash=item19f52b7826
#6 (Radio and Receiver) - FS FlySky FS-i6 2.4GHz RC Helicopter Transmitter & Receiver 6ch >> http://www.ebay.com/itm/FS-FlySky-F...Control_Parts_Accessories&hash=item3f402381c0
#7 (Custom QuadFrame) - All aluminum and zip-tie constrained. Foam in lining for smooth shock absorption. Rollcage style frame to guard electrical equipment from sudden impacts.
*Weight Without Gear Only Frame: <roughly - 6.24oz or 177g>
*Weight With Gear and Frame: <roughly - 1.5lb or .68kg>
As for now it has no FPV gear. I'm just needing to know if this will fly. Any advice or constructive criticism would be very appreciated.