fluidfungi
Member
Have Naza V2 working beautifully with SBUS to FrSky X8R, but I have 1 servo plug left floating and I have no idea where to put it. The servo is for the HDMI to AV Converter/RC Shutter that will plug into my Sony Nex5N. I think my options are:
1) Plug servo directly into X8R into channel 1 (above the SBUS cable) and program on Taranis as channel "9" and assign 3 position switch (not sure if conventional channels turn into 9-16 when using an SBUS cable because I think SBUS takes all 16 channels)?
2) Plug servo into channel 8 directly on X8R (I don't think I'm using channel 8 thru Naza (1-4=AETR, 5= gimbal pitch, 6= IOC, 7= Control Modes)?
3) Plug servo into Naza somehow either in X1 (gimbal roll which I'm not using), but no idea what channel I can associate with X1 on Tx thru SBUS?
Last, I could add another X8R to get 8 more conventional servos but this seems like a waste since I only need 1 to control the camera shutter!
Thanks for any guidance.
1) Plug servo directly into X8R into channel 1 (above the SBUS cable) and program on Taranis as channel "9" and assign 3 position switch (not sure if conventional channels turn into 9-16 when using an SBUS cable because I think SBUS takes all 16 channels)?
2) Plug servo into channel 8 directly on X8R (I don't think I'm using channel 8 thru Naza (1-4=AETR, 5= gimbal pitch, 6= IOC, 7= Control Modes)?
3) Plug servo into Naza somehow either in X1 (gimbal roll which I'm not using), but no idea what channel I can associate with X1 on Tx thru SBUS?
Last, I could add another X8R to get 8 more conventional servos but this seems like a waste since I only need 1 to control the camera shutter!
Thanks for any guidance.