ajgrattan
Member
Complete RTF system purchased Jan 2016. Not getting enough work to justify this system. All professional built and supplied by professional-multirotors.com
VULCAN Harrier X8
DJI A2 V2 (GPS Pro Plus GLONASS support)
KDE4014XF‐380 motors (x8)
KDEXF‐UAS55HVC ESC´s (x8)
400A PDB, Motorized retracts
Navigation LED (with controller)
Custom AV silicone gel plate
CF 16"x5.4 propellers
12mm Rail System
FPV pilot camera / Immersion 600mW Long range TX
Lilliput DW diversity monitor 1280x800px
Futaba 14SG Pilot remote
Futaba telemetry and receivers R7008SB Voltage and Altitude
Spare Motor (x1)
Spare Props (x4)
DJI IOSD
Batteries/Charger
iCharger 4010 DUO + eFuel 50A power supply
2 x 10,000mAh Tattu batteries 6S (18 cycles)
10 x 12,000mAh Tattu batteries 6S (16 cycles)
GIMBAL
Steady 2500 / Phobotic CP (with spectar IMU)
Brushless camera gimbal with 2x high torque and 1x outrunner brushless motors. (Closed tilt mechanism for extra rigidity and precision stabilizing). Handheld bar comes with field monitor holder + battery holder. Steady 2500 camera range: 5D mkIII/a7s/GH4 SB Metabones /BMPC4K
3 x Gens Ace 1800mAh 16,8V 25C 4S1P
Futaba TJ8 (video/gimbal operator)
Gremsy Quick release (copter and gimbal)
gimbal stand
Connex Digital Video TX HDMI
Looking for offers around 9,000 euro. Not going to split the system. Based in Republic of Ireland.
VULCAN Harrier X8
DJI A2 V2 (GPS Pro Plus GLONASS support)
KDE4014XF‐380 motors (x8)
KDEXF‐UAS55HVC ESC´s (x8)
400A PDB, Motorized retracts
Navigation LED (with controller)
Custom AV silicone gel plate
CF 16"x5.4 propellers
12mm Rail System
FPV pilot camera / Immersion 600mW Long range TX
Lilliput DW diversity monitor 1280x800px
Futaba 14SG Pilot remote
Futaba telemetry and receivers R7008SB Voltage and Altitude
Spare Motor (x1)
Spare Props (x4)
DJI IOSD
Batteries/Charger
iCharger 4010 DUO + eFuel 50A power supply
2 x 10,000mAh Tattu batteries 6S (18 cycles)
10 x 12,000mAh Tattu batteries 6S (16 cycles)
GIMBAL
Steady 2500 / Phobotic CP (with spectar IMU)
Brushless camera gimbal with 2x high torque and 1x outrunner brushless motors. (Closed tilt mechanism for extra rigidity and precision stabilizing). Handheld bar comes with field monitor holder + battery holder. Steady 2500 camera range: 5D mkIII/a7s/GH4 SB Metabones /BMPC4K
3 x Gens Ace 1800mAh 16,8V 25C 4S1P
Futaba TJ8 (video/gimbal operator)
Gremsy Quick release (copter and gimbal)
gimbal stand
Connex Digital Video TX HDMI
Looking for offers around 9,000 euro. Not going to split the system. Based in Republic of Ireland.
Last edited: