how to correct Zenmuse H3-3D "angled" one side

[Federico]

Hi folks,
I've a little problem with my ZenMuse H3-3D.
since a couple of weeks I found out that my videos are 5 degrees angled on one side.

Everything seems ok, someone can help me to correct this problem?
Maybe is there something on hardware to check or something software to adjust?

regards

Federico

 

[GregskYflYer]

Did you try to do a calibration ?


Envoyé de mon iPhone en utilisant Tapatalk

 

[Federico]

Did you try to do a calibration ?

Howto do it?
there's no mention of calibration process in the manual...!

 

[GregskYflYer]

Maybe check directly in the DJI forum !


Envoyé de mon iPhone en utilisant Tapatalk

 

[Federico]

Maybe check directly in the DJI forum !

Nobody is answering there, neither the DJI support.
it seems that is possible to make the calibration only with Phantom 2, but I have an F550 with Naza-V2.

I'm going mad...! it started this behaviour without any apparent problem occurred!

 

[SleepyC]

Known problem.
No fix. Since DJi went to all proprietary cameras they don't care.
Enjoy!

 

[dronevibes]

Firstly open the RC assistant plug in the RC via USB, select the calibration option and swirl all of the sticks and move the H3-3D gimbal control to its outer limits. Next open the Phantom 2 Assistant and Select Basic > RC. In this section there is an option to calibrate the X1 input.