WKM Gimbal help

[AIRCONROB]

First of all HAPPY NEW YEAR to everyone.

This might sound a bit silly, but on the pitch and roll that is connected to the F1 and F2 for the gimbal which I have done, and then there is the channel is wich you have to assign to a slider or a dial for pitch adjust, does that channel go into X3 of the MC?.
Just thought I'd give Geoff a chance to get some sleep and ask a few questions here.
Cheers
Rob

 

[RTRyder]

First of all HAPPY NEW YEAR to everyone.

This might sound a bit silly, but on the pitch and roll that is connected to the F1 and F2 for the gimbal which I have done, and then there is the channel is wich you have to assign to a slider or a dial for pitch adjust, does that channel go into X3 of the MC?.
Just thought I'd give Geoff a chance to get some sleep and ask a few questions here.
Cheers
Rob

Yes, if you connect a channel from the RX to X3 it will control the angle of the camera platform tilt, then assign that channel to a knob or slider. You could even use a switch if all you need is one or two fixed angle changes.

Ken

 

[AIRCONROB]

Thanks for that Ken, just wanted to be sure as I am new to these Multi rotors