Wiring on DJI GPS/Compass for Naza Lite

Chris Wilson

New Member
Purchased a GPS/Compass as part of a Naza Lite kit. Could not get GPS connected and after checking inside the unit I discovered that a wire was not connected. There are four wires 5v (red) NC (white) TX (yellow) and GND (black). The white wire NC is not connected and appears that it has broken loose from its solder. I assume it should be connected but want to make sure in case I frazzle something. Any help appreciated.
Cheers
 


Purchased a GPS/Compass as part of a Naza Lite kit. Could not get GPS connected and after checking inside the unit I discovered that a wire was not connected. There are four wires 5v (red) NC (white) TX (yellow) and GND (black). The white wire NC is not connected and appears that it has broken loose from its solder. I assume it should be connected but want to make sure in case I frazzle something. Any help appreciated.
Cheers

I am not familiar with the specific model, but generally speaking NC means No Connection. I don't think it needs to be connected based on the name.
 

Top