Mikrokopter solved... What's wrong with my Flight Control?

[ctbon]

After a nice evening of flying I put my octo to bed. The next day I charged up the battery and took her out for a fly.

ERROR: I turned on the Tx and the octo but the octo was beeping that there was no Tx. Back to the fixing lab.

I plugged it into MK Tools and it says 'no receiver connection' but the satellite lights up when I switch on the Tx but Flight Control isn't getting the message.

I rebound the Rx to the Tx but the same problem occurs.

Is my FC kaput? The only difference between the two flights is that the battery had a slightly higher charge on the second non-flight. I had the FC powered by both the molex and the pads for the first flight (whoops!) and it was fine. It was like that for the second attempt as well but I have since corrected it.

Please help...I want to fly!

 

[Bartman]

ct
it might help if you take pictures from each side of the electronics stack and post them here. that way we can look closely at what you've got.
bart

 

[ctbon]

I just solved it, Bart. Somehow, the receiver settings spontaneously switched to 'Jeti satellite' from the 'Spektrum hi-res' setting. It's weird...I didn't change or adjust anything. Oh well, I'm thrilled that there's nothing wrong with my board!

 

[ctbon]

Bart, is there a way to add "SOLVED" to the post title?