Hi,
I have seen a couple of threads here were folks have issue with cut-off engines and strange flashing led during flight. When you level you channels in your radio to match the positions for [GPS – ATTI – M] or [Home Lock – Course Lock – Off] please make sure you match them in the middle. Find left and right border were the marker will indicate Fail-Save and count the number of steps/klicks in between. On most Radios it is 6 steps. Place the point exactly into the middle (If 6 steps left to right, place it 3 steps right from the left border)
Reason:
After calibrating your Sticks in the TX Monitor you can see sometimes the sliders for T.R.E.A make some very small movements, that is normal. Same happens with the channels for control mode switch and IOC. If the slider positions are at left or right border your switching Fail-Save or other functions on for some milliseconds, as a result your MR can/will act strange and can provide you fancy blink codes.
I hope that will help some beginning folks and solve some issues
Rgds Topper
I have seen a couple of threads here were folks have issue with cut-off engines and strange flashing led during flight. When you level you channels in your radio to match the positions for [GPS – ATTI – M] or [Home Lock – Course Lock – Off] please make sure you match them in the middle. Find left and right border were the marker will indicate Fail-Save and count the number of steps/klicks in between. On most Radios it is 6 steps. Place the point exactly into the middle (If 6 steps left to right, place it 3 steps right from the left border)
Reason:
After calibrating your Sticks in the TX Monitor you can see sometimes the sliders for T.R.E.A make some very small movements, that is normal. Same happens with the channels for control mode switch and IOC. If the slider positions are at left or right border your switching Fail-Save or other functions on for some milliseconds, as a result your MR can/will act strange and can provide you fancy blink codes.
I hope that will help some beginning folks and solve some issues
Rgds Topper