I am selling this for a friend, it was assembled and that was about it. Set it up to your liking and then you are good to go. The parts are new. Yes we are aware the MX-20 shows telemetry info, the Quanum was attached as he was going to fly it with planes as well (which didn't have all the current info from a regular RX)
Breakdown:
Multirotor
-Onyxstar Full Carbon Fiber Octo Frame with upgraded 350mm landing gear
-AVRoto 2814-11 Motors
-8x 12x3.8" Carbon fiber props (not pictured) and 8x APC 12x3.8" spares
-MK Octo Distribution Board with 8x BL 2.0 ESCs
-MK FC2.1
-MK Navi 2.0
-MK GPS 2.1
-Wi232 iPhone Telemetry (All telemetry / follow me / point and click on Jailbroken phone) Modules
-3 axis servo drive camera mount (can mount Cinestar or any other mount by adding your own holes)
-LED Lighting
-
Radio
-Graupner MX-20 with plastic still over the screen(shows all MK telemetry on screen, volts, total current, current and temp per esc, gps coords, beeping vario, including speaking all of this!)
-Graupner MX-20 lipo upgrade (lasts forever)
-Quanum Telemetry module (if you want it, he will throw it in as he doesn't need it)
Batteries & Charger
-4x Turnigy 4S 5000 (30C) lipos They've been sitting a while unused, while new, they aren't guaranteed
-LipoSack (stores 4 lipos at once!)
-iCharger 208b 6S 350Watt Charger
-iCharger 350 AC/DC Power Supply
All setup and assembled cost him a little under 6K.
He will sell it all for $3500 + your method of shipping!
Any questions just ask and I'll be glad to help answer them.
Thanks
Breakdown:
Multirotor
-Onyxstar Full Carbon Fiber Octo Frame with upgraded 350mm landing gear
-AVRoto 2814-11 Motors
-8x 12x3.8" Carbon fiber props (not pictured) and 8x APC 12x3.8" spares
-MK Octo Distribution Board with 8x BL 2.0 ESCs
-MK FC2.1
-MK Navi 2.0
-MK GPS 2.1
-Wi232 iPhone Telemetry (All telemetry / follow me / point and click on Jailbroken phone) Modules
-3 axis servo drive camera mount (can mount Cinestar or any other mount by adding your own holes)
-LED Lighting
-
Radio
-Graupner MX-20 with plastic still over the screen(shows all MK telemetry on screen, volts, total current, current and temp per esc, gps coords, beeping vario, including speaking all of this!)
-Graupner MX-20 lipo upgrade (lasts forever)
-Quanum Telemetry module (if you want it, he will throw it in as he doesn't need it)
Batteries & Charger
-4x Turnigy 4S 5000 (30C) lipos They've been sitting a while unused, while new, they aren't guaranteed
-LipoSack (stores 4 lipos at once!)
-iCharger 208b 6S 350Watt Charger
-iCharger 350 AC/DC Power Supply
All setup and assembled cost him a little under 6K.
He will sell it all for $3500 + your method of shipping!
Any questions just ask and I'll be glad to help answer them.
Thanks
