lowandslow
Member
I have a new Phantom and I get no X1 movement in the assistant when I move the tilt pot on the back of the TX. Gimbal is turned on. All firmware is the latest version. Any thoughts?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
No tilt.
- Thread starter lowandslow
- Start date
Steve Nunez
Member
Mine did this too.....the culprit was the metal rod that controls the pot inside the radio pulls out of the socket when the sliding arm is tightened up......you'll need to do some Dremeling or source another transmitter...........call Rob over at Maniacs Hobbies in Plantation, Florida, they sorted mine out!
lowandslow
Member
Thanks. I ended up sending the whole thing back and getting a Phantom 2. Everything worked perfect but I didn't like the pitch lever on the back so I installed a potentiometer and knob on the front of the tx. Much better!
Steve Nunez
Member
A knob on the front would be killer, you gotta post a YouTube How To!
lowandslow
Member
Steve Nunez
Member
Excellent- thank you~ will do this!