Mounting a Photohigher AV200 or AV130 to custom frame

[tahoelight]

I have been flying the AV200 for over a year with the standard mounting of 2 CF tubes and the standard grommets. I have always felt like the design allowed for extra movement as well as allowing in any vibrations. (I always seem to be fighting some vibrations from motors or props) Can anyone share what they are successfully using to mount their AV200 or AV130 with the 360 pan kit to their frames? I would like a more "rigid" mounting system that keeps any vibes from getting to the gimbal. Being able to easily remove the gimbal for travel is important.

 

[akromatic]

I have the same problem and I think it might be solved with the two following items.. at least these are the best anti-vibe solutions I have found to date.. the first thingy seems to remove the vibrations that spread from the av200 to the camera... http://www.kopterworx.com/Camera-Mounts/Antivib-adapter-for-AV200/1-V2
the following silicone grommets will probably reduce the vibrations from the airframe to the l-shaped brackets that hold the 2 carbon fibre rods that the av200 is mounted on..
http://mikrokopter.altigator.com/anti-vibration-silicone-damper-p-40765.html
hope this helps..