Mikrokopter Carbon Octocopter with Graupner MX20 / Cinestar 2-axis / iPhone telemetry

[Sid3ways]

I have an Octo that hasn't been fully setup and I won't have time to get around to it. It was previously setup for a customer that we have exchanged. This unit is all wired up and ready to go, just needs final MK setup so if you are familiar with MK this should be a no-brainer for you.


-Onyxstar Octo Frame (new) 1000mm
-MK 2.1ME (new)
-MK 8x BL2.1 ESCs in distro board (new)
-MK Navi 2.0 (new)
-MK GPS 2.1 (new)
-AVRoto 2814-11 (new)
-Graupner MX-20 with Graupner 6000mah upgrade lipo
-iPhone telemetry modules for Navi & iPhone
-Cinestar 2-Axis camera mount
-Photohigher Skyline RSGS camera stabilizer
-4x 4S 5000 30C Turnigy Lipos




Price: I'd like to get 5,800 OBO for this or will trade for other copter setups, please let me know what you have to offer.


Picture shows how it was initially setup but it has now been reconfigured as the parts list above.


I won't part the copter itself out but have different camera mounts I can sell with it as I have a few here. Z15 Zenmuse, or AV200. opcorn:

 

[Sid3ways]

Price drop to $5300!

 

[Sid3ways]

New Pricing!
Price
$3200 for the Octo, Lipos, & telemetry
+$800 for Cinestar or AV200 (only selling with the copter first, don't ask to part this out)
+$500 for Graupner MX20

 

[Sid3ways]

Price
$3000 for the Octo, Lipos, & telemetry
+$800 for Cinestar or AV200 (only selling with the copter first, don't ask to part this out)
+$500 for Graupner MX20

 

[jfro]

What country are you in?

 

[Sid3ways]

NW Ohio (USA)

 

[jfro]

Do you have a picture of the current config?
With the Cinestar 2 axis, what is the safe limit on how much camera & lens can weigh assuming running with 2 lipos?

 

[Sid3ways]

Not sure how I missed this. I will try to get a picture of the current setup here for you to see. For anyone wondering, you could easily lift a 5D with this copter.

Price Drop
$2850 for the Octo, Lipos, & telemetry
+$800 for Cinestar or AV200 (only selling with the copter first, don't ask to part this out)
+$500 for Graupner MX20

 

[Sid3ways]

Price
$2700 for the Octo, Lipos, & telemetry
+$800 for Cinestar or AV200 (only selling with the copter first, don't ask to part this out)
+$480 for Graupner MX20

 

[Sid3ways]

I will also throw in the 3-axis kit for the Onyxstar frame as well!

 

[rocketrt]

Do you sell mx-20 only ??

 

[RRF]

I'm interested in buying everything you have listed here - the complete kit. Would love to speak with you in more detail about purchase. My email is skyfilms@xplornet.com
Thanks,
JT

 

[lbelland]

How much with the Zenmuse gimbal?

 

[Sid3ways]

$6420 + shipping.

Thanks!

 

[lbelland]

Do you have a photo of the configuration you're selling? What condition is the Z15 in? How many of these have you built? Do you have any references?

 

[aliche]

how much is the payload?
regards

 

[Sid3ways]

This could lift a 5D if you wanted to.

 

[Sid3ways]

$2650 + $470 for the Graupner MX20

$3100 for it all (minus the Cinestar).