KK Flight Controller KK2.o and Afro 30A ESC's?

On the KK2.0 board, using Afro 30A ESC's do I need to pull the red wire from the other ESC's except the one plugged into M1?

Thanks,

Jon
 


jbrumberg

Member
No. I believe that the KK2.0 and KK2.1 FC boards are the only FCB's that allow this. I have read a lot of discussion as to the pro' and con's of powering just M1 or all. I run powered ESC's into M1, M2, M3, and M4 on my KK2.0 board.
 



Top