SYNDK8
Skyvokker
Looking to sell off ALL of my gear I have amassed over 3.5 years. Two airframes and a ton of backup spare parts.
AIRFRAME
TWO Octacopter Frames 1000mm
Bullet Connector Octocopter Power Distribution Board
MOTORS
T-Motor AT-2820 830KV
T-Motor MT-2216-10 900KV
T-Motor MT3515-9 650kv
T-Motor MN4014 400kv
FLIGHT CONTROLLERS
TWO YS-X4 WiFi Flight Controller - Navigator Version w/ current sensor
DJI Wookong-M
40A SimonK EsCs - 6S - Qty 20
GIMBAL
3-Axis Carbon Fiber Freefly Camera Mount + 3 Axis Radians
Wired with ON / OFF Switch
Carbon Fiber Plate with blue and black rubber dampers
Castle BEC 10A - 6S
Infrared Remote Shutter Controller for Canon Cameras
PROPELLERS
Various materials and sizes
10 x 5 / 11 x 5 / 12 x 4.5 / 15 x 5 / 16 x 5
TRANSMITTER
TWO OpenTX FrSky 2.4Ghz 18Ch Transmitter + Backlight Upgrade
S.Bus and PPM Receivers
FPV
CE OSD v1.6
1.2GHz LM 8Ch Pro Portable AV Receiver w/ upgraded 480mhz SAW FILTER
1.2GHz 400mW 8Ch Wireless A/V Transmitter Module
RV-Splitter 4-way Composite Video Distribution Amplifier
1.2GHz Patch Antenna
1.3 GHz Bluebeam Whip Antenna Set (3 clover and 4 clover)
Eagle Eyes Diversity FPV Controller
420TVL Sony Camera 3.6mm Lens
BATTERY
1344W CellPro PowerLab8 Battery Charger + WiFi Control
Power Supply up to 47A with 12V and 24V Bullet Connectors - 110V
5000mAh Batteries - 4S
5000mAh Batteries - 5S
8000mAh Batteries – 6S
I would like to sell it locally in Mississauga, Ontario - Canada if possible. I need to clear my garage before December and will give you more parts than you can dream of if you give me a reasonable offer for everything. I am willing to trade for Zeiss Compact Prime CP.2 Lenses.
Message me if you want a detailed list of spare parts and equipment.
AIRFRAME
TWO Octacopter Frames 1000mm
Bullet Connector Octocopter Power Distribution Board
MOTORS
T-Motor AT-2820 830KV
T-Motor MT-2216-10 900KV
T-Motor MT3515-9 650kv
T-Motor MN4014 400kv
FLIGHT CONTROLLERS
TWO YS-X4 WiFi Flight Controller - Navigator Version w/ current sensor
DJI Wookong-M
40A SimonK EsCs - 6S - Qty 20
GIMBAL
3-Axis Carbon Fiber Freefly Camera Mount + 3 Axis Radians
Wired with ON / OFF Switch
Carbon Fiber Plate with blue and black rubber dampers
Castle BEC 10A - 6S
Infrared Remote Shutter Controller for Canon Cameras
PROPELLERS
Various materials and sizes
10 x 5 / 11 x 5 / 12 x 4.5 / 15 x 5 / 16 x 5
TRANSMITTER
TWO OpenTX FrSky 2.4Ghz 18Ch Transmitter + Backlight Upgrade
S.Bus and PPM Receivers
FPV
CE OSD v1.6
1.2GHz LM 8Ch Pro Portable AV Receiver w/ upgraded 480mhz SAW FILTER
1.2GHz 400mW 8Ch Wireless A/V Transmitter Module
RV-Splitter 4-way Composite Video Distribution Amplifier
1.2GHz Patch Antenna
1.3 GHz Bluebeam Whip Antenna Set (3 clover and 4 clover)
Eagle Eyes Diversity FPV Controller
420TVL Sony Camera 3.6mm Lens
BATTERY
1344W CellPro PowerLab8 Battery Charger + WiFi Control
Power Supply up to 47A with 12V and 24V Bullet Connectors - 110V
5000mAh Batteries - 4S
5000mAh Batteries - 5S
8000mAh Batteries – 6S
I would like to sell it locally in Mississauga, Ontario - Canada if possible. I need to clear my garage before December and will give you more parts than you can dream of if you give me a reasonable offer for everything. I am willing to trade for Zeiss Compact Prime CP.2 Lenses.
Message me if you want a detailed list of spare parts and equipment.
Attachments
-
IMG_5754.jpg16 KB · Views: 261
-
IMG_5857.jpg19.7 KB · Views: 254
-
IMG_2478.jpg20.3 KB · Views: 259
-
IMG_5720.jpg19.8 KB · Views: 247
-
20140226_153805.jpg20.7 KB · Views: 235
-
20140922_162415-Edit.jpg20.1 KB · Views: 251
-
20140922_162544.jpg142.2 KB · Views: 280
-
20140922_164554.jpg19.8 KB · Views: 262
-
20140922_164749.jpg12.7 KB · Views: 250
-
sticks.jpg20.2 KB · Views: 234