jjbondJjbond
Member
FLOWN ONCE BY PROFESSIONAL PILOT AND FELLOW BOARD MEMBER TO PROVE AIR WORTHINESS BEFORE I PURCHASED (I purchased it from him for $10,000.00 airframe only) THEN NEVER FLOWN (cus I knew I'd crash it..hahaha). Nothing at all wrong, the project I bought it for just never developed and I'm tired of seeing the value plummet every time DJI comes out with another toy)
Freefly Cinestar X8 Heavy Lift Red Epic drone with heaps of extras - $5000.00.
Please make sure to see all the photos on the Flickr page.
http://vancouver.craigslist.ca/nvn/ele/5531851140.html
Custom designed and built (with only the best equipment) to safely fly your $50,000.00 Red Epic camera.
PRICE INCLUDES EVERYTHING SHOWN IN THE FLICKR PICTURES, MAKE SURE TO CHECK OUT THE PHOTOS AT THE LINK BELOW!!!!!!!!!!!!!!!!!!
MOVING, HAS TO GO, PAID OVER $15,000 (Canadian $)
OPEN TO INTERESTING TRADES, LOOKING FOR MINELAB SDC-2300 OR GPZ7000 ETC...
PLEASE NOTE, FOR ALL THE PICTURES, GO TO MY FLICKR PAGE. PS: IT'S DUST ON THE CARBON FIBRE, NOT SCRATCHES. :O)
https://www.flickr.com/photos/78424919@N00/albums/72157660179196044
Here's a link to a short power up clip
http://www.nuggetfinder.ca/docs/IMG_1787.MOV
CAN DELIVER TO VANCOUVER OR KAMLOOPS!!!!!
Getting out of the UAV / Arial surveillance business, selling a new never used Freefly Cinestar 8 in X8 configuration with heaps of extras including Futaba, DJI Wookong etc, contact for more information, no test pilots.
OPEN TO INTERESTING TRADES.
Partial equipment list, WAY too much to list, see Flickr photos for full details:
Main Multirotor frame - CF octocopter main plate turned into X8 -
CF Boom Arms
CF Motor Mounting plates w/Nylon Boom Clamps
CF camera gimbal vibration plate assembly
2 axis Photohigher AV-200 Camera Gimbal with Upgraded Servos and parts to make it a 3 axis
Castle Ice 50 ESC's motor speed controllers X 8
CASTLE ICE FIELD PROGRAMMING CARD
CASTLE ICE USB PROGRAMMER
Gryphon Power Distro Board with Dual Battery Inputs
8 x Tiger 3515 Heavylift Motors
Nuts n Bolts / silicon wire / gold plated motor, esc, and Battery connections
8 x APC 14" props ( good to start flying with a bit more forgiving to small dings than wood / CF
DJI Wookong Main Brain
DJI 50 waypoint upgrade for main brain
DJI wookong Bluetooth Module
DJI Intelligent On Screen Display for AV Live view ( shows orient / battery level / ect on your camera live view feed)
DJI Wifi Datalink Module ( Links your heli to USB/PC Groundstation for showing maps / waypoints / ect ) -- This I bought as an extra with waypoints to start getting into mapping / survey / ect but havent even used it yet!
DJI 450 frame (extra) for building a practice bird...
Lots of extra propellers for 450
Jennifer
------------------------------------------------------------------
Jennifer Bond, CISA (Certified Information Systems Auditor)
Regulatory Corporate Compliance (Sarbanes-Oxley, C-SOX), Internal Audit, Deficiency Remediation,
Information Security, Macroscope, Policies & Procedures, CMMi Process Improvement
- Web Resume: http://www.jenniferbond.com
- Linkedin Profile: https://www.linkedin.com/in/jenniferbond
- Member: Institute of Internal Auditors (IIA): http://www.theiia.org
- Member: Information Systems Audit & Control Association (ISACA): http://www.isaca.org
Freefly Cinestar X8 Heavy Lift Red Epic drone with heaps of extras - $5000.00.
Please make sure to see all the photos on the Flickr page.
http://vancouver.craigslist.ca/nvn/ele/5531851140.html
Custom designed and built (with only the best equipment) to safely fly your $50,000.00 Red Epic camera.
PRICE INCLUDES EVERYTHING SHOWN IN THE FLICKR PICTURES, MAKE SURE TO CHECK OUT THE PHOTOS AT THE LINK BELOW!!!!!!!!!!!!!!!!!!
MOVING, HAS TO GO, PAID OVER $15,000 (Canadian $)
OPEN TO INTERESTING TRADES, LOOKING FOR MINELAB SDC-2300 OR GPZ7000 ETC...
PLEASE NOTE, FOR ALL THE PICTURES, GO TO MY FLICKR PAGE. PS: IT'S DUST ON THE CARBON FIBRE, NOT SCRATCHES. :O)
https://www.flickr.com/photos/78424919@N00/albums/72157660179196044
Here's a link to a short power up clip
http://www.nuggetfinder.ca/docs/IMG_1787.MOV
CAN DELIVER TO VANCOUVER OR KAMLOOPS!!!!!
Getting out of the UAV / Arial surveillance business, selling a new never used Freefly Cinestar 8 in X8 configuration with heaps of extras including Futaba, DJI Wookong etc, contact for more information, no test pilots.
OPEN TO INTERESTING TRADES.
Partial equipment list, WAY too much to list, see Flickr photos for full details:
Main Multirotor frame - CF octocopter main plate turned into X8 -
CF Boom Arms
CF Motor Mounting plates w/Nylon Boom Clamps
CF camera gimbal vibration plate assembly
2 axis Photohigher AV-200 Camera Gimbal with Upgraded Servos and parts to make it a 3 axis
Castle Ice 50 ESC's motor speed controllers X 8
CASTLE ICE FIELD PROGRAMMING CARD
CASTLE ICE USB PROGRAMMER
Gryphon Power Distro Board with Dual Battery Inputs
8 x Tiger 3515 Heavylift Motors
Nuts n Bolts / silicon wire / gold plated motor, esc, and Battery connections
8 x APC 14" props ( good to start flying with a bit more forgiving to small dings than wood / CF
DJI Wookong Main Brain
DJI 50 waypoint upgrade for main brain
DJI wookong Bluetooth Module
DJI Intelligent On Screen Display for AV Live view ( shows orient / battery level / ect on your camera live view feed)
DJI Wifi Datalink Module ( Links your heli to USB/PC Groundstation for showing maps / waypoints / ect ) -- This I bought as an extra with waypoints to start getting into mapping / survey / ect but havent even used it yet!
DJI 450 frame (extra) for building a practice bird...
Lots of extra propellers for 450
Jennifer
------------------------------------------------------------------
Jennifer Bond, CISA (Certified Information Systems Auditor)
Regulatory Corporate Compliance (Sarbanes-Oxley, C-SOX), Internal Audit, Deficiency Remediation,
Information Security, Macroscope, Policies & Procedures, CMMi Process Improvement
- Web Resume: http://www.jenniferbond.com
- Linkedin Profile: https://www.linkedin.com/in/jenniferbond
- Member: Institute of Internal Auditors (IIA): http://www.theiia.org
- Member: Information Systems Audit & Control Association (ISACA): http://www.isaca.org
Attachments
Last edited by a moderator:
