Razzil
Member
I have some spare parts and need several more to complete a new hex build. Can somebody help me out and tell me if this hex config would work? and the flight time if possible?
I always get weird results regarding the current being over the motors limit and very short flight times when I use eCalc. I can't pin point the formula to work it out manually, but I know the last time I attempted it, I sucked at it because I'm stun as !#$% with math and could never get the end result.
Turnigy Talon hexcopter
Hoveryfly Pro & GPS
(6x) AXi 2217/20 motors
(6x) Turnigy Plush 30amp esc's
(6x) Graupner Elektro 11x5 props
(1x) MaxAmps 6000mah 4S
(1x) Sony Nex5 16mm lens
Averaged to be about 2.8kg
I always get weird results regarding the current being over the motors limit and very short flight times when I use eCalc. I can't pin point the formula to work it out manually, but I know the last time I attempted it, I sucked at it because I'm stun as !#$% with math and could never get the end result.
Turnigy Talon hexcopter
Hoveryfly Pro & GPS
(6x) AXi 2217/20 motors
(6x) Turnigy Plush 30amp esc's
(6x) Graupner Elektro 11x5 props
(1x) MaxAmps 6000mah 4S
(1x) Sony Nex5 16mm lens
Averaged to be about 2.8kg