Guys I purchased this Skyjib from Josh at Allied Drones, if you search through the old ad's you will see it listed. Nothing has changed from his ad we just don't really need a Octo this size for what we are doing. It has not been flown since we purchased it as the camera we were going to use did not happen. I didn't really see the need to fly it if we didn't have work for it. Please feel free to ask any questions you might have. Also feel free to check out my ebay feedback (accuratepmi) I have 550+ feedback. I have not upgraded the HFP as of yet, so it would need that to be done and it will also need to have the radio rebound and set up. The Skyline RSGS will also need to be set up. It was installed and used by Josh, but I feel fine in saying that I would set it up for the camera that you will be using.
Some dis-assembly will be required for shipping. I will remove the arms and the landing gear for shipping.
NO crashes or hard landings - ever. It's essentially a brand new Skyjib.
Specifications:
Skyjib v1 - 2012 model
Photohigher Retracts - extended legs
Photohigher AV200 Gimbal (3 axis) + the Allied drone attachment plate for battery
Photohigher Skyline stabilizer
Hoverfly Pro (black, 2012)
Hoverfly GPS (black, 2012)
AXI 4120/14 motors + 1 spare
Turnigy Plush 60A ESCs + 1 spare
Allied Drones dual battery plates
Allied Drones Quick Release Anti Vibration Gimbal Mount
Setup for dual 5S lipo batteries and 15x4 props. 8 minute flight times with camera payload.
5 matched pairs of Nanotech 8000 5S lipos (10 total)
DX8 - Skyjib radio
DX7 - gimbal operator radio
Asking 8,000 + shipping
Some dis-assembly will be required for shipping. I will remove the arms and the landing gear for shipping.
NO crashes or hard landings - ever. It's essentially a brand new Skyjib.
Specifications:
Skyjib v1 - 2012 model
Photohigher Retracts - extended legs
Photohigher AV200 Gimbal (3 axis) + the Allied drone attachment plate for battery
Photohigher Skyline stabilizer
Hoverfly Pro (black, 2012)
Hoverfly GPS (black, 2012)
AXI 4120/14 motors + 1 spare
Turnigy Plush 60A ESCs + 1 spare
Allied Drones dual battery plates
Allied Drones Quick Release Anti Vibration Gimbal Mount
Setup for dual 5S lipo batteries and 15x4 props. 8 minute flight times with camera payload.
5 matched pairs of Nanotech 8000 5S lipos (10 total)
DX8 - Skyjib radio
DX7 - gimbal operator radio
Asking 8,000 + shipping
