Hello to the community
i have a DJI F450 Frame along with 920kv motors and 20A escs
i also have a 4s 5200mah battery and a naza mv2 with gps.
i am also using a turnigy 9x controller and turnigy 9x receiver
i ran into a problem and i cant seem to fix it.
i cant map my AUX 3 switch(3 position switch) at all
can anybody help me to figure it out.
i have X1 on channel 6 and x2 on channel 8
and those are working perfectly
i just need a channel for my 3 position switch to work properly and not interfere with my throttle.
i have a DJI F450 Frame along with 920kv motors and 20A escs
i also have a 4s 5200mah battery and a naza mv2 with gps.
i am also using a turnigy 9x controller and turnigy 9x receiver
i ran into a problem and i cant seem to fix it.
i cant map my AUX 3 switch(3 position switch) at all
can anybody help me to figure it out.
i have X1 on channel 6 and x2 on channel 8
and those are working perfectly
i just need a channel for my 3 position switch to work properly and not interfere with my throttle.
Last edited: