ryanroberts1983
Member
This setup has been built from the ground up for cost effectively out performing and out lifting other ridiculously over priced systems (Cinestar, Droidworx, etc) on the market.
Everything listed below is included, and the entire setup is very self explanatory. If you are looking for a complete solution, done and ready to fly - this is it. I will include my 2 dx7's at an additional $500 cost, or provide the new owner with model exports on an SD card they can import to their radios for bind and fly. Total flights less than 20. 100% perfect condition & completely immaculate platform. Feel free to contact me directly with any questions, I will not support the buyer after the sale, unit is sold completely as is in perfect working order. I will ship worldwide at buyers expense, but balance due by bank transfer only, or cashiers check. Local pickup is welcome, I am located in Charleston, SC.
Asking: $9950.00
FedEx Shipping: $450 international, $250 Outside North America, $150 CONUS.
http://www.ebay.com/itm/290958187924?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Demo Video:
https://vimeo.com/71822081
password: ca
Photos:
http://www.flickr.com/photos/ryanroberts1983/sets/72157634990693322/
Carbon Core 1000 Octocopter / Carbon Core 950 Hexacopter Technical Specs
DJI Wookong M Flight Controller
6x 5800 6s 30c Zippy Batteries
8x 420kv Turnigy Multistar Motors
8x 45 AMP Turnigy Multistar ESC’s
8x 14×6 XOAR Balanced / Matched Props
PhotoshipOne / Dual Battery Mount Kit
Spektrum DX7s Radio
Spektrum AR6000 Receiver
18g wire throughout
12g power leads
Extras / Spares / Freebies:
10x 14×5.5 APC Slow Fly
1x 420kv Turnigy Multistar Motor
1x 45 AMP Turnigy Multistar ESC
Carboncore 950 Hexacopter plates (top / bottom)
2x Carbon Skid replacements
Gimbal:
PhotoshipOne 3X Pro v2 Gimbal
PhotoshipOne 3X Pro / Carbon Core Mounting Plate
PhotoshipOne 3X Pro Vibration Dampening Plate
3x Savox 360* Modified Titanium 1258TG Servos
Spektrum AR6000 Receiver
2x Castle Creations UBEC (FPV Power / Gimbal Controller)
3x 2100mah E-Flight Batteries
Iftrontech 5.85ghz FPV Feed
FreeFly HDMI to Composite Converter
Stratosnapper Camera Controller
HoverFly 3 Axis Gimbal Controller (tuned)
DJI S800 Skids
1x 3s/4s Lipo voltage sensor w/audible low voltage notification
Ground:
Rechargeable 5.8ghz FPV Framing Monitor
Secraft FPV TX Tray w/Back strap
6 Lipo Parallel Charging Station
Iftrontech 5.8 Diversity Receiver
Flight / Weight Capabilities:
Sony NEX
Black Magic Cinema
Canon 7D
Canon C500
RED Epic / Scarlet
Sony FS 700
Camera Remote Operational Capabilities:
http://littlesmartthings.com/stratosnapper-supported-cameras/
Optional:
2x DX7s (Gimbal / Pilot) Fully Programmed + Additional $500
Gimbal & Pilot Settings on SD Card (for direct import if you have Spektrum Remotes)
Weight:
Octo: Unloaded Weight: 11.60 lbs / Weight With Batteries: 15.3 lbs
Hex: Unloaded Weight: 9.3 lbs / Weight With Batteries: 13.2 lbs
Everything listed below is included, and the entire setup is very self explanatory. If you are looking for a complete solution, done and ready to fly - this is it. I will include my 2 dx7's at an additional $500 cost, or provide the new owner with model exports on an SD card they can import to their radios for bind and fly. Total flights less than 20. 100% perfect condition & completely immaculate platform. Feel free to contact me directly with any questions, I will not support the buyer after the sale, unit is sold completely as is in perfect working order. I will ship worldwide at buyers expense, but balance due by bank transfer only, or cashiers check. Local pickup is welcome, I am located in Charleston, SC.
Asking: $9950.00
FedEx Shipping: $450 international, $250 Outside North America, $150 CONUS.
http://www.ebay.com/itm/290958187924?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Demo Video:
https://vimeo.com/71822081
password: ca
Photos:
http://www.flickr.com/photos/ryanroberts1983/sets/72157634990693322/
Carbon Core 1000 Octocopter / Carbon Core 950 Hexacopter Technical Specs
DJI Wookong M Flight Controller
6x 5800 6s 30c Zippy Batteries
8x 420kv Turnigy Multistar Motors
8x 45 AMP Turnigy Multistar ESC’s
8x 14×6 XOAR Balanced / Matched Props
PhotoshipOne / Dual Battery Mount Kit
Spektrum DX7s Radio
Spektrum AR6000 Receiver
18g wire throughout
12g power leads
Extras / Spares / Freebies:
10x 14×5.5 APC Slow Fly
1x 420kv Turnigy Multistar Motor
1x 45 AMP Turnigy Multistar ESC
Carboncore 950 Hexacopter plates (top / bottom)
2x Carbon Skid replacements
Gimbal:
PhotoshipOne 3X Pro v2 Gimbal
PhotoshipOne 3X Pro / Carbon Core Mounting Plate
PhotoshipOne 3X Pro Vibration Dampening Plate
3x Savox 360* Modified Titanium 1258TG Servos
Spektrum AR6000 Receiver
2x Castle Creations UBEC (FPV Power / Gimbal Controller)
3x 2100mah E-Flight Batteries
Iftrontech 5.85ghz FPV Feed
FreeFly HDMI to Composite Converter
Stratosnapper Camera Controller
HoverFly 3 Axis Gimbal Controller (tuned)
DJI S800 Skids
1x 3s/4s Lipo voltage sensor w/audible low voltage notification
Ground:
Rechargeable 5.8ghz FPV Framing Monitor
Secraft FPV TX Tray w/Back strap
6 Lipo Parallel Charging Station
Iftrontech 5.8 Diversity Receiver
Flight / Weight Capabilities:
Sony NEX
Black Magic Cinema
Canon 7D
Canon C500
RED Epic / Scarlet
Sony FS 700
Camera Remote Operational Capabilities:
http://littlesmartthings.com/stratosnapper-supported-cameras/
Optional:
2x DX7s (Gimbal / Pilot) Fully Programmed + Additional $500
Gimbal & Pilot Settings on SD Card (for direct import if you have Spektrum Remotes)
Weight:
Octo: Unloaded Weight: 11.60 lbs / Weight With Batteries: 15.3 lbs
Hex: Unloaded Weight: 9.3 lbs / Weight With Batteries: 13.2 lbs
Attachments
Last edited by a moderator: