Brushless Gimbal Complete - Vendor Links





T

tombrown1

Member
RTRyder said:
"EVO brushless set comes without brushless motors and gimbal controller."

Basically a Cinestar gimbal clone that you can install the equipment to make it into a brushless gimbal. I'd pass on this one and get a complete setup that is known to work.

Ken
Click to expand...



I'm very interested in this Twodee Evo. It looks like about $600 to get it up and running with motors and controller. And you can put any camera on it? That's my only problem with the GotHeli version is camera limitations.

Anybody with any experience with it? I have also checked over on the Twodee forum and it looks like this thing is fairly new.
 
Last edited by a moderator:

T

tstrike

pendejo grande
He originally released it as a servo based gimbal then saw the future. I had his GO gimbal and wasn't really impressed.
 
Last edited by a moderator:




nicwilke

nicwilke

Active Member
SMP said:
Starting to assemble a list of vendors offering complete brushless gimbal solutions - preference would be Gotheli since he's one of us ;) :)

http://www.fpvmodel.com/yuni-brushless-gimbal-complete-kit-preorder_p496.html

http://www.bevrc.com/mastorg-brushless-gimbals-for-gopro_p554.html

http://www.armbgc.com/cylllka-design-gimbal/

http://gothelirc.com/shopdisplayproducts.asp?id=201&cat=Brushless+Gimbal
Click to expand...

Theres the e-copter one, but not sure where you order. I've made my order direct. www.e-copter.com
 


SMP

SMP

Member
Nic, dont quote me but pretty sure the BEVRC Mastor is not an Alex. Believe its their own (copied from Alex to be sure) but might also be a Martinez.

Was also looking at the Ecopter simply because theyre supposed to be working on a TBS Discovery mount.
http://quadcopters.co.uk/brushless-gimball-gopro-luxury-version-145-c.asp


Flyduino offering PreWound Motors 80 and 150 turns plus Alex Board.
http://flyduino.net/Flyduino-GBM4008-021mm-150-Turns-Motor-for-Alex-Mos-Gimbal_1

And of course the knockoff
http://www.rctimer.com/index.php?gOo=goods_details.dwt&goodsid=872&productname=
 
Last edited by a moderator:

nicwilke

nicwilke

Active Member
Yeah, think you are correct. I'll wait for Fabiens gimbal.

SMP said:
Nic, dont quote me but pretty sure the BEVRC Mastor is not an Alex. Believe its their own (copied from Alex to be sure) but might also be a Martinez.

Was also looking at the Ecopter simply because theyre supposed to be working on a TBS Discovery mount.
http://quadcopters.co.uk/brushless-gimball-gopro-luxury-version-145-c.asp


Flyduino offering PreWound Motors 80 and 150 turns plus Alex Board.
http://flyduino.net/Flyduino-GBM4008-021mm-150-Turns-Motor-for-Alex-Mos-Gimbal_1

And of course the knockoff
http://www.rctimer.com/index.php?gOo=goods_details.dwt&goodsid=872&productname=
Click to expand...



Sent from my GT-I9305T using Tapatalk 2
 

Efliernz

Efliernz

Pete
Another to the list is the "Martinez" board and IMU from fpv-community.de (Germany). "hdworld" is listing them on the 'for sale' list here on MRF.
The 'V3' is getting positive murmours... I just might have taken a gamble and ordered one with the 4006-120 motors.
I downloaded the GUI tonight and there is enough english for me to have fun. As for the instructions in .pdf (passworded)... I'm not too good with German and this could be some fun!

Pete
 



nicwilke

nicwilke

Active Member
Efliernz said:
Another to the list is the "Martinez" board and IMU from fpv-community.de (Germany). "hdworld" is listing them on the 'for sale' list here on MRF.
The 'V3' is getting positive murmours... I just might have taken a gamble and ordered one with the 4006-120 motors.
I downloaded the GUI tonight and there is enough english for me to have fun. As for the instructions in .pdf (passworded)... I'm not too good with German and this could be some fun!

Pete
Click to expand...

Negotiating now for the whole gimbal. That'll give me one of each, Alexmos and Martinez to compare the two. Hero 3 black in each, side by side.

Sent from my GT-I9305T using Tapatalk 2
 



SMP

SMP

Member
Seems like even the 4008/150 motors with the Alex type boards have an 800-900 gram camera optimum and about a 1200g limit - So Nex5/GP3 and down.
Now its just to finding the one that has the right combo of mount, construction quality and weight.
 

You must log in or register to reply here.
Top