Any Iftron Tx users here...I'm having some trouble with my FPV

[ctbon]

I'm using a Mondo Stinger 5.8 500mW Tx to a Nano 5.8 receiver. I'm getting static so I know the receiver is working fine but nothing is being transmitted. I'm not sure how to set the channels so they match. I'm looking at this PDF:

http://dl.dropbox.com/u/4722284/Iftron_Transmitter_Information.pdf

What does the SW3, SW2, SW1 mean in the table at the top of the screen.

I am using a Sony CCD camera.

 

[Bartman]

SW1, 2, and 3 are the three dip switches from left to right. the fourth switch is for the battery saver.
make the three switches match the channel diagram you want and that channel will be set. i think the channel combinations are shown on the transmitter body.
let me know if it works for you.
bart

 

[ctbon]

Thanks, Bart. FPV is working great. I can't wait to fly! Now about that summer, Vancouver...anytime now. I hear the rest of the continent is sweltering and we are cloudy, rainy and no more than 16C/60F. I should get some video posted soon. Thanks again, Bart!

The problem was the battery saver was ON but I'm running a 2S so it should be OFF. I was wondering why the bloody thing didn't have a power light. I am now illuminated.

BTW, that little Tx gets hot!