activating IOC on a Phantom

[budman]

Hello every one , Iam trying to turn IOC on but its wanting me to update my firmware first and I would rather not my Phantom is flying great. My firmware is at 3.14 now and the update is 3.16. Iam using naza assistant 2.16 does anybody know a way around this. Thanks

 

[robyr1]

you should to do the compas calibration, and then you'll be able to enable the IOC!

 

[PeteDee]

You can't enable IOC or arm the FCU until you have done the GPS calibration.

Pete

 

[budman]

Turning the IOC on

Hello every one , Iam trying to turn IOC on but its wanting me to update my firmware first and I would rather not my Phantom is flying great. My firmware is at 3.14 now and the update is 3.16. Iam using naza assistant 2.16 does anybody know a way around this. Thanks

Thanks guys for your replies and help, I calibrated the compass before my first flight. I used naza assistant 2.14 to turn on the IOC and set the second Att switch position to failsafe instead of manual to use as a go home function I haven't tried it yet but HL and CL work great.

 

[PeteDee]

I would never, ever, ever, ever set up a controller without a manual mode.

Pete

 

[BC-deGraaf]

Witout manual you cant get control back. When you have a fly a way !!! I lost a f550 my self! Because i had attgps-ATT-failsafe !!!

 

[budman]

I would never, ever, ever, ever set up a controller without a manual mode.

Pete

Oh ya I see your point, but wouldn't switching to ATT mode allow you to regain control

 

[PeteDee]

Maybe, your choice to risk it.