Tomstoy2
Member
I've been having troubles dialing in my Hexa with the 5.06 firmware that came out, so much so that I removed it and reinstalled the old version.
So, knowing full well there was now a version 5.08 out, I loaded it into my WKM.
Long suspecting these expensive Graupner props were not working out either, ( kept getting it to roll off center in i piro, not holding altitude or attitude very well, yawing, toilet bowl ), I rebalanced my Gaui's and threw them back on.
The results? Extremely happy!
:tears_of_joy:
An 8 minute flight left the motors between 91 to 97 degrees F, and the holding power I really wanted!
I did a total of 5 flights to get her dialed in. The first 4 was in pretty rough weather as a storm front pulled thru, winds gusting like crazy and from different directions.
The last one was after the front pushed thry and is pretty calm conditions, small gusts from 1 to 2 mph.
http://www.youtube.com/watch?feature...&v=iberH5tVFdQ
Here is what she looks like today.
:tears_of_joy:
So, knowing full well there was now a version 5.08 out, I loaded it into my WKM.
Long suspecting these expensive Graupner props were not working out either, ( kept getting it to roll off center in i piro, not holding altitude or attitude very well, yawing, toilet bowl ), I rebalanced my Gaui's and threw them back on.
The results? Extremely happy!
:tears_of_joy:
An 8 minute flight left the motors between 91 to 97 degrees F, and the holding power I really wanted!
I did a total of 5 flights to get her dialed in. The first 4 was in pretty rough weather as a storm front pulled thru, winds gusting like crazy and from different directions.
The last one was after the front pushed thry and is pretty calm conditions, small gusts from 1 to 2 mph.
http://www.youtube.com/watch?feature...&v=iberH5tVFdQ
Here is what she looks like today.