Search results

Hi Trevcharl, Sorry I was confused when you re-posted just the quote from Jose luis anez, Feb 24, 2016 (first posting on this string), as I thought it was Jose luis anez, reposting his very old request for more help. Jose luis anez, has only posted once on this string for help from last Feb...

Hi Jose luis anez, I have a 550 Quad, equipped with the DJI Naza-M Lite FC, which works very well. I need some more information from you, I was not able to find any 6 channel 2.4ghz AeroSky Receivers on the web. If I understand correctly, you do not have bind between your Radio transmitter and...

You may want to purchase the Turnigy 9XR-Pro and to go with it the FrSky XJT transmiter module. This radio has a lot more capability then the one you are looking at. (http://www.hobbyking.com/hobbyking/store/__51442__Turnigy_9XR_PRO_Radio_Transmitter_Mode_2_without_module_.html) and...

This photo is what I use with a 3S battery. Also see here for some more info: (http://openrcforums.com/forum/viewtopic.php?f=7&t=4582&p=114948&hilit=Naza+M+lite#p115143). See here too: (http://openrcforums.com/forum/viewtopic.php?f=95&t=8978&hilit=NAZA+M+Lite).

Hi moonpie57108, I have been busy with a 510 quad repairing a small crash and flying with it which also has the NASA-M Lite F/C. I have been thinking about what to do with the 700 quad with the front motor arms being elongated 4 inch longer from the rear motor arms. I have been thinking to...

Hi bobspryn, Futaba radios are good, but they cost a lot more and can be very difficult to use. I understand how some people like and trust produces that they are very used-to using all the time. Opentx and/or erSky9x are open-source firmware's which have great support and have many advantages...

With the 9XR-Pro you will still have to purchase the external FrSky XJT transmitter module and the stick Gimbals in the 9XR-Pro are not very good (may become unreliable). Some people are doing mods to install Taranis Gimbals in there 9XR-Pro radios. The Taranis-Plus comes an XJT module...

Hi moonpie57108, The first test flight did oscillate some as it was moving around a lot too. It was difficult to keep it stable in flight. When I am test flying, I am in Atti mode and not using GPS mode, as with this DJI NAZA-M Lite F/C it will not go into GPS mode unless the quad is 30 feet...

I use CH5 for U and use three, 3 position switches for Atti mode, GPS mode, Manual mode and Failsafe mode. And then I use CH6 for X2 and use it for the the IOC modes: Course Lock and Home Lock. The Radio I am using is the Taranis and I use erSky9x firmware on it. The Taranis has mostly 3...

Radio CH5 to NAZA-M Lite U needs to be setup to a 3 position switch OR two or three 2 position switches, you do this with your PC. You will need to able to select Manual mode, Atti mode, GPS mode and Failsafe mode with your radio switches. CH6 to X2 for the IOC modes: Course Lock and Home Lock...

Have you powered up your model with your radio on and then connect USB to your PC ? I believe you should have a green LED light at this point. Bob B.

If you still need help, let me know. GPS not connected. Check that you have the proper switch value in your radio that it is going into the Atti mode and not the Manual mode. To do this you need to connect your NASA F/C (powered on) to your PC with your radio (powered on) at the same time. You...

Hi, Are you still having trouble as no one has answered your request for help ? If you do still need help, what is the firmware you are running on your 9X radio (er9x, erSky9x or openTx) ? And if any upgrades you may have done ? Bob B.

I believe you should not expect to be trying to hover when in manual mode. Use Atti mode at 50% throttle and when quad is 30 feet away from your transmitter switch to GPS mode. When in GPS mode your F450 quad may drift around in a 15 foot circle (max) or less. Sometimes when in GPS mode your...

Hi moonpie57108, Thank you for your reply, I will recheck and recalibrate everything before I try another test flight. I was able to try test flying the 700 quad with the newer PID's at 230 values and when it lifted off up to about 3 feet was very unstable. It was so very unstable as each of the...

Here are some pics of the 700 Quad and the NASA Gain Settings. When I moved the Rudder Stick just a little the Quad goes out of control and crashes. It became a lawn ornament after only a little rudder stick movement.

Hi, I have built a 70mm Quad which is elongated by 10mm (4 inches). I change from a MultiWii Flight Controller Board to the DJI Naza-M Lite Flight Controller with Ublox GPS and used the Gain settings for a F550. These Gain settings are not right for this 10mm elongated 700 Quad. What...