Search results

I'm lost.... 4 flights and no control but Throttle. Whats up? Weights in the video have kept it from exploding everytime it crashes. X8 configuration Flew with A2 fine for a year (minus loosing altitude issue, thus the change in FC) AUW 25lbs See pics for Gains etc. Videos here...

This is more a courtesy to the pilot. Being a pilot myself and being on many TV's shows and National commercials, it's a high stress non stop gig. If you're flying ALL day long 5-10 minute breaks is no biggie. If it's a wait all day then fly 5 flights in a row, no need for breaks BUT pick...

Reset gimbal, compter AND monitior. Completely remove power from all.

Anyone know where i can buy the Triangle stickers for the DJI S1000 retracts that say "mind your fingers" CHEERS!

ML RAW on Zenmuse?? We cannot get it to work. If nayone here knows of what settings to try that would be great! Here is what happens: We boot everything up, plug in the zenmuse and on the monitor for Cam op we see Matrix like code across screen non stop. when we hit record button on controller...

I also just did the update to the new firmware, and I just get yellow green over and over. Abnormal compass data. I tried this in multiple locations, (Seriously fine any other time) So I try to put it into Calibration mode, and nothing happens... Any ideas?

Here is a brand new set of the rare and famous U7 motors. These are 420KV. We didn't need them for a project and are putting them up for sale WITHOUT a markup, just what we paid. Don't miss out. U7s are expected to be available in a few months.... Get yours here NOW. Shipping $20 USA text or...

Hey guys! Building my own frame and the only way to mount the V3's is upside down. So when the legs are retracted, it's straight, or in the Landing position, or when they are down, they are in the "up" position. Obviously they wobble quite a bit when up, since the o-rings aren't engaged... Any...

Agreed, but this problem can't be fixed with settings on any controller. It's within our GH3 zenmuse. We've fiddled with every setting you could imagine on all Tx's with the en, and then with the Movi, and it's 100% the zenmuse. You are lucky your GH3 Z works! This is my 3rd one. As for the...

Jumping in here late, but wanted to add my 2 cents. We have the exact same problem, and it is infuriating. There is no smooth transition no matter how slow my operator moved the stick. I am very experienced at cam op, and jumped in there ,and can't get it to smooth start stop either. Looking...

Hey guys, I have been having a problem with my S800 and having the throttle stay the same between GPS and ATTI modes. this problem is random, and sometimes does it, and sometimes it doesn't. I have sent the following video to my distributor, and am waiting to hear back. I wanted to hit you guys...

Super stoked to hear about your findings with the A2 system! Cheers! https://vimeo.com/74500759

Hey guys! wanted to share our demo reel, of which we used our s800, and gh2 zenmuse (hacked to fit gh3 with secraft kit) Hope you enjoy! https://vimeo.com/74500759

hjls3, It was happening in all circumstances. Here's how it went: I took off, hovered fine for 10 seconds, then started my mission. I flew forward about 100 ft and above the ground at about 100 ft. As i neared the 100 ft, it started to turn, not yaw, on it's own. I would attempt to correct it by...

deanot, agreed. He speaks English well.We even spoke on the phone once. I am not sure why he felt like saying that. But oh well, moving on.... I'm going to tear down the heli tomorrow and check all wiring, soldered wires, cables etc. It has to be something involved with communication between...

MombasaFlash, What tells you I don't know my equipment? Is this any help to my question by responding with a snark remark? Last time we talked you were very helpful.... Please enlighten me on what I am missing here that says I don't know my equipment... The only thing I can conclude, is an arm...

S800 Spins when above 100ft, but fine when below 50 ft So we have a very odd issue. Our S800 (fully loaded all the time, with 2 6s 5000 batteries and a zenmuse) either slowly spins to the left or right on it's own when above 100 ft, or full on spins on it's own 1 rotation a second...fast. SO...

Guys I have a GH3 conversion from secraft on my S800 and Zenmuse. So far , not good. I cant balance enough to get it to NOT vibrate. I swap back to my GH2 mount with GH2 and its SMOOOTH. I don't know if the motors can handle the extra weight. I am spending the night balancing it, if it still...

Thanks for the reply, and yes, if the camera is set to NTSC it is Black and White. The only way i can switch it is obviously by hacking the firmware. If left factory, it is just NTSC and Black and white. When hacked, It is the same, unless I flip it to PAL. then there is color. I should also...

YEs I am in contact with them... I even have the newest V3 board. My question is is there a way to only change the HDMI out to PAL, not the actual recording? The zenmuse only needs to see PAL to work in Color