Search results

  1. Hartz

    Fliping does not go away

    1045R spins clockwise CW. It's the direction the prop is heading - like reading a book from left to right.
  2. Hartz

    Battery Life / Flashing Red Led

    That's strange, I have mine at 10 and 9.5 currently. I may not have touched the second level values since upgrading though *scratches head*
  3. Hartz

    Battery Life / Flashing Red Led

    Maybe you do have a dodgy cell. Give it a balance charge and check what they go up to, run it for a minute or two and check again. I balance charge my batteries every time, which with a 3S 2200mAh battery takes between 30-45 minutes, sometimes longer. Can't say what kind of flight times you...
  4. Hartz

    Battery Life / Flashing Red Led

    Those loaded values are much higher than what I use. I have 10.5v loaded first level, second level 9.5v loaded for my 3S batteries. I am not saying you should use what I use as everyone seems to have a different opinion of what they should be. Here is how I came about my values... You should...
  5. Hartz

    Return To Home - what am I doing wrong?

    The green flashing (upwards of 20 times) on indicates that you have good GPS lock + the home position is set. You can also manually set the home location by switching the IOC switch on/off repeatedly about 10 times - it should flash green repeatedly again to let you know that home has been set...
  6. Hartz

    DJI naza howing problems

    Try different props first if you have some handy, then arms. How flexible are they? I couldn't imagine that they would be flexible enough to be a problem. I am not experienced enough on different frames to give comment. Can I ask why you switched frames in the first place?
  7. Hartz

    DJI naza howing problems

    I have just put E-Prop 10x5's on my quad and I am noticing that it wobbles on descent, even changing the gains do not resolve. I believe that I might be over-propped for the weight. If your new frame is lighter than the F450 then you might be experiencing the same issue. If only just to test...
  8. Hartz

    DJI naza howing problems

    Hmm :apathy: are you using the same props that you have always used? And like deanot suggested, if you give it some height how does it hover then?
  9. Hartz

    DJI naza howing problems

    The yaw and vertical look quite high to me compared to the other gains that you have. Have a look at the examples in the new Naza manual, 2nd last page of this document and try tweaking your settings. Those settings might have worked for you in the past but with a new frame comes different...
  10. Hartz

    Team BlackSheep arrested in Italy.

    In Dubai you can get arrested for drinking alcohol or holding hands in public, so you simply don't do it. Regardless of what the reasons are for the ban, TBS should be respecting the laws of the country they are flying in. As for the ban itself, at a guess I would say that it is in place to...
  11. Hartz

    DJI naza howing problems

    Also what are your gains currently at?
  12. Hartz

    DJI has released the new firmware v3.12 for Naza-M

    I upgraded to 3.12 yesterday and so far I am pretty happy with the results.
  13. Hartz

    Team BlackSheep arrested in Italy.

    They seem to think they are above the law - in comments they noted that they were aware that it was illegal to photograph/film the wreck, yet they did it anyway. They can use any excuse they like but at the end of the day they are doing it to sell more product and make more money. In the...
  14. Hartz

    Graupner E-Prop

    I just put the Graupners on with the stock DJI nut and tighten it so it is firm. No washers here. Works fine but I only have about an hour on them so far.
  15. Hartz

    DJI NazaM firmware v3.10 poll

    I am very confident that this firmware was tested extensively. Bugs still slip through the cracks though. As someone who works with software developers and testers I can understand exactly how this happens. It makes more sense to keep your customers happy rather than deliberately break their...
  16. Hartz

    DJI NazaM firmware v3.10 poll

    As there are a few people out there having problems with this firmware I thought it might be interesting to get some numbers.
  17. Hartz

    DJI Naza M V2

    Can you video/document it and post here for us to see?
  18. Hartz

    DJI Naza M V2

    Wait a second, does the iOSD work with the v1 now?
  19. Hartz

    upgraded naza m to v2 and motors wont startup now

    I have flown with my stock gains which were about 150% across the board. I don't like it so far although it may be the new Graupner props also. It seems very twitchy, a little angry to control when zipping aroung but very smooth in takeoff and hover. It feels funny when tackling high alt wind...
Top