Search results

  1. C

    KDE Direct XF UAS ESC and Flight Controller Compatibility List

    Are you using Tiger motors? I was having very similar sync issues using Tiger motors and KDE esc's. Swapped out the esc's for Tiger Air's and was then all good. Tiger ESC's seem to run the KDE motors better but still not ideal. I think the best is to keep the motor esc combos of the same brand.
  2. C

    KDE Direct XF UAS ESC and Flight Controller Compatibility List

    I have KDE ESC's, getting no power from the Pixhawk yet I can arm and even fly the machine no problem. But did run into issues when doing an auto tune - it just flipped as soon as the flicked the switch. Is this caused because there is no power running the opto coupler?? Thanks
  3. C

    Aeronavics / Droidworx SkyJib X4XL

    No you don't need the QR clips in there, just handy when wanting to remove the cage as less bolts to undo - but can also be bolted solid
  4. C

    DJI Introducing no fly zones in next firmware.

    Can anyone confirm if the Wookong is restricted near airports? and if so, can you roll back the firmware to an earlier version? I need to be able to set up some waypoints. Not sure if the No fly restriction is in the flight controller or ground station, or maybe both? Thanks
  5. C

    Pixhawk Feedback?

    I agree, those connectors are crap
  6. C

    A2 and WKM on 8s batteries

    I know the manual recommends 2-6s but what is the max? is it 6s can can these flight controllers take 8s? If not, is there a way to get around this? Thanks
  7. C

    Futaba to Spektrum trainer leads

    Yeah thats what I worried about. Says on the site that it works but would be good to hear from anyone thats tried it. Here is a video of a guy that made his own
  8. C

    Futaba to Spektrum trainer leads

    Found this but not sure how well it works?
  9. C

    Futaba to Spektrum trainer leads

    I have done a bit of searching but don't seem to find much. Do these trainer cords exist? Wanting to link a DX9 with a 14SG Thanks
  10. C

    3.5mm Bullet connector Amp rating

    I'm wanting to use the new KDE 5215 motors with the 55A ESC's. The ESC's have 3.5mm bullets but the motors come with 4mm. As I have to cut the motor wires down anyway, I was thinking I would replace the 4mm motor bullets with 3.5mm. I'm just not sure of the Amp rating on the 3.5mm bullets...
  11. C

    Aeronavics / Droidworx Skyjib x4 upgrade question

    This is with a SJ X4 using KDE 5215 motors https://www.youtube.com/watch?v=buaA01sUWnU
  12. C

    My flip of death experience

    All your failsafe settings will be the same, its only the way you program them thats different. With the 14SG you set the failsafes from the failsafe screen in the radio. Set the throttle in the position you want and push the button. Same goes for all the other stick and switch positions. When...
  13. C

    My flip of death experience

    Hey Eric Are you using Spektrum? When setting the fail safe's you should bind or set the fail safe with the throttle at around 48%. You can check your failsafe settings buy bench testing. With the props OFF, power up you TX and craft and connect the FC to your PC, now switch off your TX and...
  14. C

    My flip of death experience

    As you have an OSD, can't you get a flight log off that? this may tell you something?
  15. C

    Aeronavics / Droidworx New Build Planned - SkyJib-X4 Heavy Retractable

    The U motors have not been out long which is why DW would have recommended the 4014's
  16. C

    Aeronavics / Droidworx SkyJib Retractable Landing Gear not Locking

    Hi Guys This issue can be corrected by reversing the link arms on the retracts, the will mean the retracts operate in the right direction and the retract arming/disarming will also working correctly.
  17. C

    LED Question

    I'm wanting to do this with my WKM, are you saying we could strip the LED from a Phantom then wire in the extra LED's?
  18. C

    LED Question

    I've also wanted to know this. I sent an email to DJI directly and heard nothing.
  19. C

    Do you have to remove the Red esc wire ??

    The Red wire they are talking about is the one on the servo wire. This cable gets plugged into the AutoPilot controller.
  20. C

    DJI Ground Station

    No one can help with this?? Thanks
Top