Search results

Tarot 680 Pro airframe Tarot ZYX-M FC w/OSD Aerosky 4822-690 motors MultiStar Opto 45a Escs 10 x KM387 CF 13x5.5 props Tarot quick release prop adaptors Tarot 2D gimbal Turnigy HD ActionCam 1080P Full HD Video Camera w/32g MicroSD card (C10), waterproof case and all accessories 4 SJCam batteries...

Works going conventional, but can't it to bind going with just DSMX satellites

I'm trying to set it up now on my JR11X...cant get it to bind.

Went ahead and ordered from RMRC.

I'm sorry, I looked at the date of the origonal ad and figured it was already sold and I went ahead and bought a V4 Uno from Ready Made RC.

Anyone have an extra 5.8g Video receiver (compatable with ImmeresionRC 600mW Vtx) laying around they don't use? Kinda looking for an ImmersionRC Uno for around $50. Or, if someone could steer me towards something on Banggood (I have an order ready there, but if I could add a Vrx from their...

Lag, Do you still have the Uno?

I need a couple of these: Mine has the little clip on the inside of the red lever broken. I know I can buy the whole assembly from multiple sources, but if anyone has these and they have upgraded to retracts, I'll take these off your hands. Thanks, Jon

I can't wait to get into it. Right now, with work and school it might be a little while before I start plugging things in. In the mean time, I'm watching this thread and the one on RCG to see what issues folks are coming up with. On another note, anyone have a set of Tarot 680 Pro folding...

I went ahead and bought the Tarot ZXY-M with OSD combo from Gothelirc.com. Should have it in my hands by the end of the week. Jon

Okay, I got my Tarot 680Pro. I'm ready to buy my FC. I have Naza experience, and some KK2.x experience...I really want this Tarot FC, but there still seems to be a lot of back and forth, good and bad on the RCG thread for this FC. I know it can only get better with FW & SW upgrades. Should I...

Thanks.

Just curious, with a 3-axis gimbal, can it be set up to stabilize in all three axis, but when you do a rudder turn, the yaw axis of the gimbal doesn't move? Basically, stable in 3-axis in hover, but when I yaw the machine, the gimbal follows the heading of the machine. Jon

I'm thinking about getting one too. Just trying to decide which aiframe to go with. I want a hex, just which one...

Okay, I saw a post on RCG about a guy that upgraded his Lite to V2. This is the link: http://naza-upgrade.com/ Anyone else hear of this or have any other info on this? Jon

I'm flying a HK Predator 650 with the Naza-M Lite. I'm really liking everything with the way it flies, except the way it pirouettes. If I go light on the rudder, it'll piro smooth, but if I give hard rudder (either way) it kicks the nose up, rolls a little in the direction of the piro then...

I did finally get to fly my Predator 650/Naza-L and I love, love, love demonstrating the RTH to my friends. It worked the first time without any issue. My Predator lands within 2m of take off point. I've got my sights set on a Naza-M V2 now and getting the Ground Station setup...it's way cool...

I'm thinking you shouldn't be using a flight control board, but rather should go to a two stick, 4+ channel radio (insted of a pistol grip car radio). You could mod the throttle stick to be a self centering (like the other stick) with the center being motors off. Use sensored car brushless...

When you plug in the programmer, the LCD screen onm the KK will be blank, but lit. Once you flash it with the firmware you want, then the board LCD will populate, you load the motor layout and can do other prorgamming. I just flashed three boards last night, a 2.1HC and two standard 2.1.5's...

From the KK2.1 V1.18S1 Manual over on *** in Steveis's blog: o Set your transmitter throttle stick to maximum o Press and hold down buttons 1 & 4 on the KK2.1.X o Turn on the power to the Multicopter o Wait for the ESC to beep its full throttle calibrated signal. Takes a few seconds, depends...