Search results

Impressive selections. Thank you.

Suggestions for GoPro 4 Silver filter package. Something in a polarizing filter for videos of migrating salmon and other filters for primarily bright sunslight.

The H4-3D info on the DJI site says GoPro 4 Black with no mention of Silver. Any chance we could get a clarification on that? Also any chance of finding out what power is sent from the the H3-3D Gimbal controller to gimbal and on to the GoPro via the usb cable? If I connect the USB cable to...

Ed: The posts I have seen says there is nothing different about the H43D than balancing and possibly firmware. Is there anything available showing what should work in terms of video out between a GP4 and H3-3d or is the expectation everyone just upgrade to a H4-3D.

Ed: Managed a short in flight test today and saw intermittent excursions to both to the right and the left. Had no output video cables connected just wanted to see if the gimbal would work as a gimbal. To recap I have record mode/power issues and no video out to IOSD when using the supplied...

Ed: When I connect to the GP4S with the gimbal cable/usb connection I can not manually start recording until I power cycle it. If I disconnect the cable that comes with the gimbal and use the RMRC cable direct tot he IOSDII I can manually record but nothing is fed to the IOSDII. Next weather...

I have a several problems with a H3-3D and a GoPro 4 Silver with a IOSDII and NazaV2. What little I can find on the H4-3D says mid February availability . Anything that can be done in the interim?

FI: My experience has been the same as soler. Only thing I saved was the cam which had an amazing recovery like yours. The Naza and the rest of the electronics may have been OK but wasn't about to risk the cost of the rest of the equipment in case of a possible intermittent failure. Mine was...

Ed: Will do. Do you recommend the every 20th cycle draw down?

Greetings: New P2V+ out of the box with 6 flights no mods, no crashes and auw is 1280 grams w/o lens cap. First flight with FPV booster V2 app on was 16 minutes 20 seconds. Second flight same battery and almost same conditions but no booster was 16 minutes 51 seconds. On both flights Wifi...

Greetings: Building a F450 with TBS extended arms and would like to find quality landing gear similar to the AeroXcraft gear I have on my F550. Any suggestions?

In my case the ezosd gps was mounted on arm 4 of my F550 and the current sensor was mounted on arm 5. Distance was 3 to 3/12" What distance did you end up using successfully? My altitude display was slow/inaccurate which I can live with but the ascent/descent indicator was totally missing...

Chipwich: As noted in my post above I am using the mini osd to diagnose why my ezosd altitude display and rate of ascent/descent indicator do no work on the same hex as the mini iosd where they do work.

BB55: Excellent idea. I can not get altitude or rate of climb/descent to work on my EZOSD/ w current sensor so would like to see the mah used feature added on my Mini Iosd that has excellent altitude and rate of climb/descent display

Bartman: I understand parallel charging as it has commonalities to all multi cell battery systems in that the weakest cell always drives the show. My battery charging station is directly under a smoke detector and I have a special fireproof bag I put them in. I had a lipo fire once after a...

Charger/Power Supply Bartman: Both my wind generators and solar panels generate DC which is stored in 10,000 AH @48vdc battery bank. The 48vdc is fed to two inverter/chargers that provide 110/220 AC just like the grid. I have several low power items that run directly off the 48vdc battery...

I agree. This is the combo charger/supply I am considering: http://www.buddyrc.com/ep-buddy-1150w-57a-25v-server-power-supply.html http://www.buddyrc.com/icharger-306b.htm I know its overkill but I think I could charge two of my 6s 6000mah lipos concurrently at the recommended 2c rate of...

I don't have 20 amp service. Even with #12 wire and a 50' run I think the max is around 15 amps.

Each output includes built-in balancing for 2-3S lithium packs (both outputs).Specifications for Each Output: Battery Types: 4-8 NiCd or NiMH (4.8-9.6V) 1-3 LiPo or LiFe (3.7-11.1V) Each output includes built-in balancing for 2-3S lithium packs (both outputs). Maybe I'm reading it wrong but...

Can not find a charger that will effectively charge a 6s 6000mah lipo without a DC power supply input. Live in a remote area with all Renewable energy input so concerned about input power requirements. Any recommendations for 6s charger/power suppy combination ?