Search results

On the new firmware there is a checkbox to prevent the motors from starting if the minSd is missing. Make sure this checkbox is set correctly. ie if you don't have a minSD then make sure the koptertools reflects this

on my Cinestar 8 it will not start if the compass is not calibrated. When building it is important to calibrate to compensate for the local magnetic field. I then have to put the throttle stick to top left to set the accelerometers to level and then smart as normal with throttle stick down to...

I had a real problem with toilet bowling and flying waypoints. The last flight it went wild halfway around a waypoint flight and shot up 200ft crazy. I had to fly manual to lands. I seem to have fixed it by stripping down the MK tower and checking all my wiring. I have twisted every pair and...

That has to be my next task; check ESC connectors for security.

Can anyone tell us how to clear IMU memory? Cheers, Ray

I too would like to know how to clear the IMU memory. I don't think it is s stupid question. :-)

Hi, Thanks will try this. I have been investigating today and calibrated the uav as well as balanced all the props. I am just about to upgrade the flight software so hopefully this will clear the IMU memory. Regards, Ray

I have a Mikrokopter hexa xl wit Wookong m and today when flying I noticed the Wookong light was flashing a rapid white light. When reading the manual I think this means attitude status bad. Does anyone know what this means? Also the hexa is very twitchy in pitch and roll, like it is on...

I have an mk hexa with Wookong m and a MX20 transmitter. I want to make sure failsafe is set up properly so that it will work when the MX20 is switched off. The assistant software shows that when the MX20 is switched off it goes in to failsafe on the slider display. The question is do I...