Search results

Hi, we have had exactly the same eperience with 5.10 and 5.12 Downgrading to 5.08 has solved the TB issue for us too. Frank

Hey guys, I am looking for an CS 3-axis upgrade kit with or without landing gear. Please offer also related accessories (3S LiPo, BEC, ...) I am located in Germany Frank

and here is our latest clip: Wine area called "Volkacher Mainschleife" in Frankonia, Bavaria, Germany. Enjoy! http://vimeo.com/50515183 Frank

Hallo, da kannst du zum Beispiel CamRemote-2 Pro mit dem entsprechenden zusätzlichen Kabel für die GH2 nehmen. Kostet so rund 100 Eur Frank Gesendet von meinem iPad mit Tapatalk HD

http://www.dji-innovations.com/products/wookong-m/downloads/ But I recommend to stay at 5.08 at present. I went back to 5.08. There seem to be some unsolved issues regarding reliability wit 5.10 and 5.12/5.12a, even with hexa. Frank

Yes, turning The compass counterwise is The solution If everything Else is OK. Check compass/imu xyz values, and balance first. Frank

Yes, you can use X2 only once. Either for remote gains or for IOC. If X2 is used for remote gains, you cannot activate IOC checkbox. Same if X2 is not connected to the receiver. But as you wrote, you have double checked the connection ;) Frank

Is X2 really connected to the receiver? Are you using X2 in "Autopilot" for remote gains? Frank

Just an idea..... I have heared about two naza incidents during the last G1 storm: http://www.multirotorforums.com/showthread.php?5063-Geomagnetig-Field-disturbances-expected Frank

Yesterday we have tried to downgrade to 5.06 What should I say.... Hexa works PERFeCT again!!! After adjusting compass Declination aprox. 30* ccw, and rising the gains, especially for vertical and roll, our Hexa was rock solid, evn in strong wind (bft 3-4) Acpuiring home position (green...

Hej ChrisViperM, of course. Please refer to some more detailed explainations on NOAA website: http://www.swpc.noaa.gov/NOAAscales/index.html A Kp Index >4 can cause some navigation Errors when using GPS. Frank

Hi Folks, again, there might be issues using GPS within the next hours and days... So we should be extremly careful while using GPS positioning... Frank

Hi, thanks for your comments. I thought 5.10 and 5.12 are similar, only Octo issues have been changed.... So will try 5.06 and 5.10 today. Frank

Hi guys, for two weeks now, we cannot get our Hexa fly properly again. Please help, any suggestion appreciated: CS6 frame, 13x6,5 carbon props, 2x4S5000 Here are our current results with different firmwares and setups: 5.08 155/125/155/155: Toilet Bowl, clockwise no straight flight, drift to...

I have sent you PM

take a look at kopterworx' videos on his facebook page. Matjaz has already published some awesome test flight videos. Frank

Hi Thijmen, which firmware are you using? Maybe this thread about octo issues similar to your description may be of interest: http://www.multirotorforums.com/showthread.php?t=4777 Gesendet von meinem iPad mit Tapatalk HD

Hi, as always: everything depends on your application and experience/know-how Frank Gesendet von meinem iPad mit Tapatalk HD

Maybe my description was not clear enough ;) I have not used GS for testing first. Copter behavior was as he simply does not automatcally store the homepoint at take-off. RTH is working perfectly as soon as I manually store the homepoint using GS. maybe I was too impatient before take off...

I have checked with GroundStation the homepoint GPS value only. All commands were given by RC. The RTH was activated by U channel (GPS Atti/Atti/fail-safe) during the first take offs, there was no value in the "Homepoint field" of GS. Copter circled around the take off location. After setting...