Search results

  1. C

    Lesson learned today

    Makes sure that the stem on the motor adapter does not have and grit or sand gains in the threads before trying to remove that nut or this will happen. And I only like another 5% have the gains set on my 810 also.
  2. C

    Tarot 680 aka 810

    This flight is with the new 15X5.5 props and simple BGC gimabal and gopro. Was kinda windy so I can't figure if its my gains or the windy so I will try another flight without the wind if possible. I just can't figure out why my gimbal went into spasms at the last the way it did. The gins I had a...
  3. C

    Weird naza action

    I stopped using my desk top for the naza v2 and I put the program onto my laptop. After going through the setup again I took the hexacopter out for a test flight. It never got off the ground each time I tried. Put the hexa back on the bench and went through the program again and found nothing...
  4. C

    Battery Charger

    Looking for a battery charger that will charge 6s 10,000Mah batteries one at a time and will not break the bank.
  5. C

    Weight to motor comparsion

    I have an Arris 810 Hexacopter (AUW 3620 Grams) with Arris 4010 pro 380Kv motors. With 13x4.7 props on it they have 780 grams thrust at 50% per motor. Running 30Amp esc's and 6S 3300 batteries in parallel. With 15x5.5 props it will have 950 grams of thrust at 50% per motor. I just did the...
  6. C

    Simple BGC 2.2 brushless gimbal

    I have config. the gimbal with the simple software and everything work accordingly. I have a taranis tx with an x8r rc using ubus. I have my gimbal programmed so that the "LS" switch (Left side) moves the camera up and down but it does not move with that switch. However I can move my elevator...
  7. C

    For Sale Garage sale Multirotors and Frames

    Sam_1/Sam_2......Tarot Quad/Hexacopter with A/V transmitter, Taranis X8R receiver, (Real) 3DR Pixhawk (KIT) with GPS. Picture #1, #2, #3 and #12 are for a Tarot 680 Pro. It has a (Real) 3DR Pixhawk FC, Buzzer, Arming switch, Ublox GPS, 915 3DR Radios and A/V transmitter with...
  8. C

    3DR Pixhawk

    I have a 3DR Pixhawk with 915MHz radios and all the correct connections for sale. Items have never been in a crash and like new condition. Reason for selling is I'm tired of a picky FC. Asking $250.00 shipped anywhere in the USA. Price drop: $200.00
  9. C

    RC Logger Camera

    I have an RC Logger Camera for sell for $60.00 dollars and it works great. Pictures below if you are interested. Update: Price dropped $45.00 shipped in the USA
  10. C

    HK 650MM Hexacaopter (New)

    I have a HK 650MM hexacopter frame new in the plastic package never assembled. I also have that same frame that I assembled and flew. I will sale both frames for $50.00 shipped in the USA. No electronics just the bare frames. Update: Price drop $40.00 Shipped in the USA...
  11. C

    Arris M680 Hybrid 810MM

    I sold my HK 650MM Hexacopter and used the money to buy the combo below the Arris M680 Hexacopter. I have ordered (6) 16MMX14MMX330MM carbon fiber tube to convert it into a 810MM Hexacopter. This will allow me to swing up to 15" props with the included motors. I"m still waiting on parts to get...
  12. C

    650MM Hexacopter

    I have 2 frames like this one http://www.hobbyking.com/hobbyking/store/__48704__HobbyKing_650X6_Folding_HexaCopter_Frame_with_Tall_Crab_Landing_Gear_KIT_.html And I was thinking about using these motors with 30Amp esc's. http://rctimer.com/product-1086.html I think they might work ok with that...
  13. C

    Alien Quad Copter

    My buddy would like to buy these parts for a quad copter and I was wondering if you guys could give more insight on his list than myself. Below is what he and I have come up with. http://www.hobbyking.com/hobbyking/s...sion_Kit_.html http://www.hobbyking.com/hobbyking/s...obbyking/store...
  14. C

    Pixhawk Flight Log Files

    Could some one take a look at these files and advise my if anything is wrong. https://drive.google.com/file/d/0B3Nv4kLq69xJRkl6Y1BweVVtLTA/view?usp=sharing https://drive.google.com/file/d/0B3Nv4kLq69xJQkZtM0VHbHZCTzg/view?usp=sharing
  15. C

    Pixhawk left roll

    After calibrating the gps and accel several times I still have a left roll on my quad, I run a Taranis tx with a X8R rx on 4S battery. I was told that my compassmot was not set correctly but after several resets it still moves left with the right stick centered. And I have re-calibrated my radio...
  16. C

    RCL-1000 Logger

    I have a RCL-1000 Logger for sale with a 4GB sd card. Asking $60.00 2ith shipping and pictures and video below.
  17. C

    Gimbal Software

    My gimbal came with limited instrutions so anyone familiar with this software. ZYX-BMGC-EN_V1.5.EXE I think its the same as the Tarot but I'm very confused about the settings. Any suggestion on how to configure this?
  18. C

    Camera gimbal voltage

    I bought this camera gimbal and I was wondering about the voltage. I e-mailed the seller and he doesn't know. I"m guessing that its 12V like most others that I have seen in the 2-axis gimbals. Link below it the cheap ebay gimbal...
  19. C

    Pixhawk PID

    Why will pixhawk not let me change the altitude pid setting. I change it from 1.00 to 1.300 and click write parameter and if goes back to 1.00. I also have a drift while in stable and althold. I have re-calibrated the gps and the accel. several times and each time the pixhawk has accepted the...
  20. C

    Pixhawk Drifting

    Pixhawk on my quad is finally air born and I have a drift problem. It will drift left and backwards at the same time I have used trim to try and correct the problem with no results. Any suggestions?
Top