Search results

  1. A

    Hello from Tennessee

    I started with an MQX, and have a DJI Phantom and F550. I also have a Nano QX and several helicopters, Coaxial, fixed pitch, and collective pitch. Working my way up to bigger multi-rotors to carry bigger cameras.
  2. A

    Hello from Tennessee

    Welcome Gary. I have been flying the quads for a little while. Doing some filming here and there. I am over the hill in Fountain City. Again, welcome to the group, Allan
  3. A

    Phantom TX Signal Lost - Blinks Yellow Continuously

    I seem to have the same problem. But if I plug and unplug the battery, it will eventually connect. I added the upgrade board, Zemuse, and the 5.8 Wireless Video TX. It seem to start after that.
  4. A

    GoPro3+ announced

    I went through and compared spec anywhere I could find them. The cameras have the same weight and dimensions unless the info I found was wrong. All the wight savings and size appears to have come from a different case. Both the 3 and 3+ can be used in each other's cases.
  5. A

    gopro fpv?

    Kloner, I am in the process of building a DJI550 and have landing gear with a GoPro gimbal. I want to install FPV so I can see where the camera is pointed and for FPV flights. I noticed above that you said the 3s batteries would work but the 4s batteries would not. I had planned on using 4s...
  6. A

    Hoverfly Meeting with FAA

    I think it's great that Al is taking the ball and running with it. It's an initial glimpse of things heading in the right direction.
  7. A

    Editing software.... Where to start?

    I use PP CS6. A lot of my friends that used FCPX are switching over. They like the integration of the Adobe Master Suite. A great place to learn software is http://www.lynda.com, it's not free, but they have tutorials on a lot of software.
  8. A

    F-550 Naza + GPS Rapid Uncontrolled Ascent

    It may be a stupid question, but have you looked at the throttle curves on the TX?
  9. A

    Fly with power lines, Interference Problems????

    i think you're OK as long as you stay at least 6 to 10 feet away, but I would check that with one of the engineers from the power company. I asked an engineer from TVA a similar question.
  10. A

    First quad build - F450 battery question

    Why smaller props with bigger battery?
  11. A

    I wish I had known.... F550 purchase, build and first flights..

    I have been following your thread, and it has been quite helpful. I am getting ready to build my first F550. I am looking for a list of everything I will need to complete my build. So far I have: DJI F550 ARF Kit DJI Naza DJI Naza GPS Module/Antenna Graupner E- Prop 10"X5 Naza FlameGear...
  12. A

    I wish I had known.... F550 purchase, build and first flights..

    I think a noob section on here with a full blown list of all the acronyms spelled out would be a great idea, maybe some of the masters could start that up.
  13. A

    I wish I had known.... F550 purchase, build and first flights..

    Getting ready to build a DJI550 myself, good info.
  14. A

    New to Multi-Rotors but looking to accelerate my learning curve.

    Any good suggestions for simulators for multi-rotors?
  15. A

    New to Multi-Rotors but looking to accelerate my learning curve.

    Hi all, I am new to multi-rotor copters, and want to make sure I build a good base before going all in on a pro rig to fly my photography/video equipment. I have researched myself to the analysis - paralysis mentioned in one of the threads. I want something to learn with as well as be able to...
  16. A

    Help with Building a CineStar 8 (& Copters in General)

    Al I am interested in your opinion also. While I am not ready to purchase now, it is the direction I am moving in.
  17. A

    Help with Building a CineStar 8 (& Copters in General)

    So the 450 would have no problem carrying a gopro and fpv system?
  18. A

    Help with Building a CineStar 8 (& Copters in General)

    "I'd suggest getting the gps module, naza, and a f450 arf" Any reason why you would suggest a f450 quad instead of a f550 hex?
Top