Search results

It pains me to list this for sale. Its a truly awesome machine. Aeronavics skyjib 8 x4 frame Retractable landing gear Kopterowrks KW10 motors (each precisely balanced) 15&16" Xoar Props, precisely blanced Herkules III esc (the most reliable esc available) Herkules III Telemetry module and data...

$150 USD plus shipping

Hardly used, TBS 5.8ghz receiver installed + selection of TBS and IBCrazy antennas $170 USD plus shipping

Futaba 8FG Remote Hardly used, always stored in pelican case. $250USD plus shipping

Futaba 14SG with R7003SB Hardly used, excellent 14 channel remote. Always stored in Pelican case. $300 USD plus shipping

Went to charge up some revolectrix 9000mah 6s battery for my sky jib after not flying for 7 months. And the first battery I try is down to 19.8v and one of the cells has died while in storage, on storage charge. The battery isn't the slightest bit puffed, I've had probably 40 cycles through it...

Hi guys, So I finally decided to pick up a Rc shutter remote for my GH3. Im using it with a futaba 8fg,which is just for camera control as its a two man set up. Ive set it up to be on channel 1, on switch SF. Im using the SBUS out to control a alexmos 32bit controller. I can get a led strobe...

Clearing out some things, Parts that a are no longer used. All parts are near new with light usage. Feel free to ask questions on any of the gear. Super X Pro, like new - $400 YS-X6, with Data Link - SOLD Iftron 5.8 Yellowjacket pro receiver and Mondo stinger 500mw transmitter - $SOLD...

Hi Guys, I was just taking my 3 axis gimbal apart to replace some parts. I accedently pulled the motor leads off, when i was pulling one of the carbon tubes out of the clamps. Now I need to disassemble the motor and take the stator off to solder the leads back on, its a 5108-120t, does any one...

Hi Guys, Its time for a clean out of spare parts left over from various builds. All Parts are near new with only a small amount of use. -YS-X6, including GPS, WIFI and 900mhz Data Link: $800 -3 Freefly Radians, 3 Freefly Servos, Hardware, Programming board and Other parts: $700 -Emcotec SPS...

Hi Guys, Im looking for a BEC that can output 12v for my FPV VTX, and run off my 6s flight battery? Havent had much luck finding one. Cheers Ryan

Where can i buy a replacement gps mast? Preferably a DJI style one. Cheers Ryan

Is the BEV-WDR 750s the same as the foxtech WDR 750s? http://www.foxtechfpv.com/wdr-750s-600tvl-wide-dynamic-range-mini-cam（Pal）-p-652.html http://www.rcmodelscout.com/FPV/BEV-WDR750-700TVL-OSD-control-color-CCD-camera/57754# With fpv cameras can there be firmware differences? Im looking at...

Yesterday when testing my Skyjib X8 I noticed the voltage sag between no load and hovering was .8 volts. This seems pretty high to me, can any one comment on what is normal or acceptable? Just some info on my multi: KW10 motors Xoar 15x5 props Herkules esc nanotech 8000mah 25-50c batteries...

Hi guys, ive got tiger 3515 props with the standard 6mm prop adapters on them, i was wondering if any one know where i can get some of the prop adapters to run the low profile carbon props? Also does any one know if they fit on the 3515 motor? Cheers Ryan

Hi I was just wondering is it safe to run the elogger with gps while using YS-X6 with GPS, or any other flight controller for that matter?

Hi guys, Im interested in finding out what components interfere with what on a multi rotor. Im about to lay everything out on my Skyjib x4 and would like to know what i need to keep separated from what. Such as what components to becs interfere with ? Radio receiver? imu? datalink? What all...

Hi, does any one know if it is better to use the smallest possible frame on a coax x8 to get stability? or does a larger frame with more motor to motor spacing give you more stability? Cheers

Can any one help me with setting the phase assignment switches up for YS-X6. I cant seem to be able to get both three position switches working correctly. I can set one switch up to Manual mode, Attitude mode and GPS Attitude mode. That works fine. But when it comes to setting up the second...

Hi guys, Im wanting to hear some opinions on using the Graupner Single Line output connection for my Skyjib build. I know people use it in the SRH world and Mikrokopter uses it. Can any one see any issues if i used it for YS-X6? How many of you are using it?