Search results

Kilby - you have pretty high gains. Aerial Media Pros conversion kit product page recommends 120/120/150/150 and atti 120/120. But I have read somewhere that you should increase your gains if you install bigger motors. So would guess your 250/250/150/160 and atti 80/80 should work fine for...

Hi I am looking for some tips regarding gain settings and fail safe settings for my upgraded 550: DJI F550 with arm extensions and 2814 motors from Aerial Media pros with 11x5 carbon props Opto 30A escs. Wookong M GohteliRC brushless gimbal HDMI converter/Lawmate 2.4Ghz/1000mw Sony NEX5-n with...

Must add from previous post that I have now lowered the D setting from 15 to 10, and the jitter is gone :) I have also attached a male to male servo cable from RC pitch on the ALexmos card to the F2 port on the WKM unit. I have zeroed out all gimbal settings in the WKM GUI except the Pitch X3...

Big thanks to GotheliRC for making this gimbal! I was lucky to get one from the first batch. And at this pricepoint its just fantastic!! I unboxed mine, and attached it to my DJI F550 with the old gimbal plate that was already there (from the belt driven AG550). Then I downloaded firmware 1.3...

Yes. Only upgrade was motors - Tiger motors 2216 900kv. With 10" graupners I tried to lift off with my 5000mah 3S batteries. But could not lift this heavy! I then changed to 4S batteries. And with the Flightmax S4 8000mah which is 30C - I get those flight times mentioned in above post. But bare...

DJI F550 WKM with AG550 gimbal and NEX5n with 18-55mm. Upgraded stock motors to Tigers 2216. Graupner 10x5 props. Total weight: 3,3 kg. Batteries: Fligthmax S4 8000 Easy flying/hovering: 9-10 min Agressive active flying: 7-8 min (have 3 batteries and they differ) Approx 3.5 pr cell left...

Hi I have similar problems with my new Torxpower 2216 920kv on my DJI F550. I took off the stock DJI 2212 motors but left the DJI 30A escs on as they should have plenty of headroom for these motors! I use zippy 4S 8000mah 30c and 10x5 graupner props. I should mention that this Hexa did very...

Hi Gunter thanks for quick reply. Really appreciate this forum and the way people want to help :) This sounds very likely and I will give it a try. Its just that with the weight of 3kgs +, I have been told from others that 10 inch props are the way to go. But since you claim this works better...

I was hoping for input/help from others with the same built as me. I have a DJI F550 with Wookong. Stock motors and ESCs. Graupner 10x5 props and Flightmax 8000mah S4 batteries. Reason for not S3 batteries and 10x5 Graupners is the AG550 gimbal from Tppacks. With my NEX5-n with 18-55mm lens...