Search results

  1. H

    Newb building u580 pro, need guidance

    Ok, so here's what I ended up with: hmf u580 pro sunnysky v3508 700kv motors hobbywing 40a xrotor escs hkpilot32 flight controller package (gps,telemetry radios,pwr mod., ect.) Taranis plus tx frsky x8r rx apc multirotor mr props 13" 5.5 craft and theory telemetry cable 4s batteries actual...
  2. H

    power module question

    Thanks Crayfellow. I looked at the Mauch. Definitely what I need. I went ahead and tried it the way I described above with the hk power module and it worked as I suspected. measures voltage fine, current measure is just what the electronics are drawing. Maiden flight was a success. 32 min...
  3. H

    power module question

    Well, the plan is, going to make a main battery connection to the pdb with some 10 awg wire and xt90. Going to tap the power module to the board on one side for power for the pixhawk if it will work and use another 5 volt bec to the servo rail for backup. We'll see if it works.
  4. H

    power module question

    It is supposed to be between the battery and the pdb. But on my setup, I don't think it can take the current.
  5. H

    power module question

    Ok, so I have an hk power module to provide voltage to a pixhawk. This thing has xt60 connectors and fairly small wire. My setup at 100% could pull 106 amps. I know I probably won't ever draw that much current but It's possible none the less. Could I make a heavier battery connection harness...
  6. H

    Newb building u580 pro, need guidance

    322.5 is the per cell weight. X4 it's 1290g. All up weight is 2956g.
  7. H

    Newb building u580 pro, need guidance

    Ended up going with this setup. Parts ordered and now the waiting begins.
  8. H

    Newb building u580 pro, need guidance

    All I have is a frame. I'm just trying to pick parts at this point.
  9. H

    Newb building u580 pro, need guidance

    Please give me a critique of this setup.
Top