Search results

The dji naza will allow remote adjustment of the gains using the x1 x2 and gear channels, however, I'm using those for flite control modes and gimbal tilt, therefore you're limited to whatever you set them at in the naza assistant. Using the dual rates on the spectrum transmitter only affects...

I have a DX9 and use the dual rates on my MR setups. I set switch C to the rudder pos 0 @100% pos 1 @ 50% pos 2 @ 35% and set switch F to the aileron & elevator same settings. I think it works good for video, it makes the stick's feel less sensitive without feeling sluggish like the expo does...

Funny I was thinking the same thing.....here's what I do to practice, buy a little cheap one and fly it in circles around my wife's head while she is trying to swat it out of the air.... this will help sharpen your reflexes!

I use t motors and t motor escs with a naza v2 on my tarot 810 and only get one beep and it works fine.

Did you set the receiver type to "Traditional" in the Naza assistant software?

Hey Tahoe Ed, thanks for trying to help. I am aware of the thread name, Phantom + Lightbridge - Freefall, I figured two of the three things in the name applied to me, Phantom and Freefall, maybe the Lightbride has nothing to do with the problem

I'm using the dji avi58 which is 5.8gHz The light bridge is 2.4gHz

I thought the same thing at first but other people seam to be having the same problem with stock receivers. I tried to use a spectrum ar80000 but the phantom 2 assistant software will not allow you to switch to a "traditional." receiver. I need something with s-bus. The ar8000 will work on a...

Does anyone have any new info on this problem? My phantom 2 is doing the exact same thing. I have a h32d gimbal, iso mini, and dji video downlink. I've added an orange rx8 through the s bus and use a spectrum dx9, and run carbon fibor props it flew great about 10 times, then randomly started...

The sj4000 I have will fit in the gimbal and work fine if you're not using FPV. If you could find a small mini to micro USB adapter to connect the H3 2d to the camera you would be all set, I just haven't found one yet. I picked up the sjcam sj5000+ a few weeks ago, nice camera except it's a...

Yeah, I was thinking the same thing here's a link to a site I found that sells the sheets of carbon fiber.... I like their name... http://dragonplate.com/mobile/categories.asp?cID=94

I had a similar problem with t-motor 4014's on my 810, the motor mount screw's provided by t-motor were to long and caused a short when tightened all the way in. I changed them all out for shorter ones. I mounted the esc's and power distribution under the bottom plate, then bought additional...

I bought several sj4000 cameras from infinity hobby, I use them for shooting B-roll footage and sketchy shoots the may ruin a camera. http://www.infinity-hobby.com/main/product_info.php?products_id=10770 The specs are not as good as the one you listed above (1080 /30fps, 720/60fps) and this...

Hey, that looks pretty cool, I just finished building a Tarot 810 and was thinking about building a racer, now I'll have to wait and see how this works out, it looks like it will be fast!

Did you try a stick calibration on your Dx9 in the naza assistant?