Search results

I gave up using radio 2.4 Tx with 1.3 FPV as 120 meters was about all the distance I could get along with a constant "telemetry is low" or "telemetry is critical" voice from my radio. Set up and filters were properly configured. I bought a Dragonlink kit and can now fly my 450 the way I...

Good stuff there SleepyC. Built a 450 with FPV and just a Möbius camera. Really have been blown away by the Phantom 3 video capabilities. Really vexed over adding a gimbal and GoPro to this build or buying the 3. David

After posting this question in February and reading the responses I decided to build a 450. For those pondering the same question, Bartman's response is right on target! I think that seasoned members of the RC group have probably forgotten how foreign all the verbiage, nominclature, parts...

YourDaddy, there are several monitors with 5.8ghz receivers built in. I'm new at this, but seems like you ought to be able to split the signal with something like a ...

I've done one and two on your list. I'll try #3 below is a photo of the set up. David

I am wondering if I can do anything else to improve my 2.4 Tx reception since adding a 1.3 RMRC vTx? I used this http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_66_71&products_id=3397 and this...

The Ready Made RC 8" monitor seems adequate, but I don't have anything to compare it to. David

I'll let you know what I think of ready made RC 's 8" monitor after it gets here. It's on the way. Not sure about the HD part though because, IIRC, it's sll analogue

Will do. thanks for your reply. David

I've done a fair amount of searching forums regarding FPV monitor screens and it appears there no consensus on what people like. The RMRC 8" appears to have a following, but it is currently out of stock ( that may mean something); however, the RMRC 10.1" doesn't seem to get the same love even...

I hope this plays. Using Möbius camera. Too scared to put anything better on it due to crashes. No idea where I got that awful music. Just want to thank everyone again for answering my questions. FPV is next.

Thanks for taking the time to look at my list. I will adjust the filtering components. David

Following dtw's advice and links to diy ground station using 1.2 gHz freq I've listed the following components: http://www.readymaderc.com/store/index.php?main_page=product_info&products_id=1017 http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_34_44&products_id=1015...

Thanks tstrike Also remembered this - order extra Flamewheel legs and arms at beginning so you aren't like me now waiting 3 weeks for replacements after multiple crashes And , I ordered EC3 connectors, but couldn't get the battery wires from the 4s batteries into the bullet. So, I returned them...

First of all, thanks to everyone's responses. Especially Bartman's videos. I have a barebones 450 flying! This thread is 2 years old and still active because of my kind (novice) still needing help. I have a short video of it flying from my iPhone, but the file won't upload So here is where...

Last question before ordering some of this stuff. I am using DJI's GPS ..does the interference of the 1.2/3 vTx really knock down the number of satellites or cause significant intermittent GPS signal loss?

I'll check out your recommendations and thanks a bunch for taking the time to answer my questions. I've gotten a lot of good advice here and so far it's really paid off. David

http://hobbywireless.com/12-ghz-13-ghz-systems-c-179_117_88_90/fpv1380-plug-and-play-13ghz-800mw-wireless-system-usa-version-1258-and-1280-mhz-p-951.html Sorry, I didn't realize that I had copied a page instead of the item.

Thank you Bartman. For a novice, there are a ton of variables when troubleshooting problems. There's the ESC's programming, the radio configuration, the proper software configuration and they all have to be correct. It seems like you'd need an expert sitting there with you looking at the radio...

Guess I'm the last one to follow the 450 build thread. Any answer to following two questions would be appreciated : I've followed the Taranis/NAZA set up by Gringers to the tee & rechecked it twenty times, but using the sbus connection my thrust and elevator controls are backwards? Any ideas...