Search results

  1. J

    Naza Multi rotor controler from a phantom and a pmu v2

    I bet it has something to do with stick position and arming Sent from my iPhone using Tapatalk
  2. J

    Naza Multi rotor controler from a phantom and a pmu v2

    Did you reverse the throttle chan in your transmitter Sent from my iPhone using Tapatalk
  3. J

    Naza Multi rotor controler from a phantom and a pmu v2

    If u didn't it will be like he said, since phantom has an altitude stick not throttle Sent from my iPhone using Tapatalk
  4. J

    Naza Multi rotor controler from a phantom and a pmu v2

    First off you did reflash from phantom back to naza didn't u Sent from my iPhone using Tapatalk
  5. J

    Naza Multi rotor controler from a phantom and a pmu v2

    Does it beep any when u turn it on? Where are u located? Sent from my iPhone using Tapatalk
  6. J

    Naza Multi rotor controler from a phantom and a pmu v2

    Also here is link to the manual of your esc, it tells you how to calibrate it http://www.hobbyking.com/hobbyking/store/uploads/934316348X1085196X31.pdf Look at bottom of first page "Begin to use your new esc" Sent from my iPhone using Tapatalk
  7. J

    Naza Multi rotor controler from a phantom and a pmu v2

    ALL brushless escs have to be calibrated. If you don't have a 4-1 adaptor You will have to do them one at a time. Plug 1 into throttle channel of receiver -turn on transmitter with throttle at max -power on Esc -after beeps -move throttle to min -unplug and go to next channel I almost bet that...
  8. J

    Naza Multi rotor controler from a phantom and a pmu v2

    Did you calibrate the esc before you started? Typically the throttle chan is reversed on futaba Sent from my iPhone using Tapatalk
  9. J

    Scorpion SkyStrider 280 build (help needed)

    Reflashed to baseflight and in horizon with Baro it goes up and down about 3-4ft. And before anyone asks I do have foam on the Baro. Still in horizon + Baro any cyclic movement and it drops and yaw makes it drop, I know I need to adjust pid's I know. Still looking for a good video or step by...
  10. J

    Scorpion SkyStrider 280 build (help needed)

    I will go re flash back to baseflight and see how it does, I'll keep u posted Sent from my iPad using Tapatalk
  11. J

    Group Build 2016, Let's get it on!

    The TBS Discovery does use DJI arms Sent from my iPhone using Tapatalk
  12. J

    Scorpion SkyStrider 280 build (help needed)

    For the past while I've slowly been building up a strider 280 to be given away as one of the awards for our outreach flight school program. Would love to be able to get something pre-configured but we gotta do with what's donated and in our budget, on to the meat. Frame assembly was simple as...
  13. J

    iFlight RC hot seller flycat260 V2 FPV racer with PDB built-in

    One of my buds got one of these and it's quite heavy Sent from my iPhone using Tapatalk
  14. J

    OSD for 250 RACERS

    Right now I'm using the mini-minimosd on a naze and gotta say it was a pain to solder up but it's a real space saver And will tuck in right by my cam and not even know it's there I have to give credit to OscarLang's blog for the idea of pinning it out this way Sent from my iPhone using...
  15. J

    Group Build 2016, Let's get it on!

    I'd say a flamewheel or disco "style" would be the most readily available and probably the cheapest option. The kids in our flight school this year will be building f450's would be a nice tie-in to get them in the forums with build logs in a group build Sent from my iPhone using Tapatalk
  16. J

    Dead-cat style 450 build for FPV

    Finally got all the parts in for my video system, got one of the cheaper starter kits RC5808 VRx TS 58200 VTx And repurposing one of my older surveillance cameras for now MinimOSD I'm thinking of removing the mic off of the camera board but may wait to see if this cam will even work out for...
  17. J

    Dead-cat style 450 build for FPV

    Got the distribution board mounted in the center section For now I'm using 2x Pulse 2250mah 3s lipos in parallel, will go to a 5000mah 3s later on Added another LED (blue) and zipped it to GPS mast so I could better see it, plan on building up a LED status bar (4 color) and put it in same...
  18. J

    Antenna placement for VTx and Telemety

    This is probably a dumb question but I can't find any relevant info. I'm trying to figure out placement for my video TX and my Telemety unit. Video is 5.8GHz and Telemety is 933MHz here is a pic of what I'm thinking, also concider the VTx will be swapped to an omni soon, Question is, will this...
  19. J

    Dead-cat style 450 build for FPV

    Just finished soldering up my distribution board / current sensor/ power module, just have to finish the heat shrink and put taps for BEC's Sent from my iPhone using Tapatalk
  20. J

    Dead-cat style 450 build for FPV

    For now, I'm just going to pull the (+) out of 3 of the ESC plugs, but plan on later completely removing all but signal from the ESC's. Probably should have done that prior to mounting them but didn't realize it until just now. On my receiver I removed a lot of the unnecessary wiring just to...
Top