Search results

Im looking to finally make the fpv jump however I got a few questions Ive been looking at the starter package’s on readymaderc. Based on the fact that I will have to anticipate the possibility of a tree coming between me and the MR, so ive been thinking of 900-1300 for the frequency range. Not...

so i decided to upgrade my lightweight clone last night to the newest firmware to see if it fixed any problems. firmware upgrade went well, defaulted and rewrote all the settings, blah blah blah. cycle the fc. i take the mr over to a spot to do a test flight, i CNC and only m1 and m2 are...

http://rctimer.com/index.php?gOo=goods_details.dwt&goodsid=722&productname= cheaper then going with dji :P

some pictures from the quad rebuild project, had a bad crash and decided to do a full tear down, and relay everything out. i need new bearings for a suppo so im waiting on a replacement to show up at this time. so im using a set of sunnysky 2814's 1250kv's they run a bit warm, but they got some...

hello all, recently had a crash and got some dirt in a motor, and i was wondering what would be the best way to clean it? ended up breaking an arm from 40-50ft up on a long slide in to the soft ground. canned air and distilled water maybe? or are there some other cleaners that will work?

so it was bound to happen, i had just gotten the quad up in the air and took it out for a little flight it was flying good, until i got to the end of the field i was flying in. and all the sudden i ended up loosing control. but i was able to avoid the bigger trees, and other obstacles and ended...

so ive started to notice some random control wierdness with the hex and the quad. it seems to be after alot of forward motion the naza kinda of stops responding to stick movements to brake or to counter the current direction of travel. and to correct this it takes alot of additional counter...

looking for a set of 9x5's cw and ccw for a hex. they seem to be hard to come by at this moment :(

so i started my f550 build out this past weekend, im going with the following 6x sunnysky 2814's 1250kv, dji esc's , 10x5 grapners, an x468 go pro gimbal (still need the remainder of the parts for this, servo's, bec, etc) below is the picture log so far. still need to figure out the best set...

hey guys, so i recently picked up a x468 gimbal, and i do remember in my time here that there are alot of issues with the naza and getting the right servo response. im going to be mounting the gimbal on a f550 frame with a naza controller. thanks.

im looking to replace the stock dji motors on the artf f450 frame. (with something thats a bit more serviceable friendly..) ive found the following. just wondering if they will work with the stock parts, and i need to figure out what prop adapter i would need as well. to take the 10x5 graupers...

hello all, been posting for a few weeks here, new to the non toy quads :) first kit was/is the DJI F450 NAZA, its taken a bit to get the hang of some crashes, but all and all quite quite fun :P also looking to add a gopro2 as well as eventually a vtx goggle setup. also waiting for spring cuz...

hello again i have a question regarding soldering and connectors, i recently just got 2 turnigy 4000mah 3s packs. woot! the problem i have is they have 8 gauge wire to what appears to be 5mm bullets, and the wire that i have on hand and that feeds the power board on the dji flamewheel is 14...

i gotta give props to lou and hobby-drones.com. i was out flying this afternoon and took a nasty spill with the quad it took a nose dive in a field, from about 10ft up and it was going at a pretty decent speed. :( so i drive home and put an order in and get a call from lou 10-15min later...

hey guys, here is a question out of the blue, i remember seeing that there are portable gun breifcases that have adjustable foam inserts, i was wondering if anyone has seen one that could fit the dji flamewheel 450 with props and all? and to have enough space for bats, etc. just thinking this...

ive done some searching and either im being blind or just not seeing the data, but i have several packs, and looking for the ideal charge rate, im using a thunderpower TP610C-ACDC i do have a thunder power 3s g6 battery(2700mah) which can charge at 5c it says 13.5amp(charger doesnt go that high...