Search results

Hello Fltundra, In regards of motor alignment, it only has an error of 0.4-0.2 degrees in just one of them (M2), other 3 motors (M1,M3 and M4) all have same degrees with an error of 0.1 to 0.2 degrees (1/10th of one degree),…. I don't think that I can get them closer to a zero, this because I...

Hello Guys, I did some new flights, here is the result… I double checked props and they were very well balanced, then I checked motor alignment as Kloners video, at first site they all looked aligned, but for my frame I tough that it was not so precise, so I did a 4 point calibration using an...

Hello Guys, I did some new flights, here is the result… I double checked props and they were very well balanced, then I checked motor alignment as Kloners video, at first site they all looked aligned, but for my frame I tough that it was not so precise, so I did a 4 point calibration using an...

Thanks Fltundra, I will do some test with default settings on the ESCs. About the props I did check balance and they are well balanced, I checked with two balancers and they are both showing balanced props, so I am ruling out a prop balance problem, I already re-checked them. I will do a motor...

In regards of the KDE ESC's programming: - I adjusted the S.R. BRAKING ACTIVATION to "PRECISION", I was told by KDE that this will immediately enable the braking to the highest-level (maximum control of acceleration and deceleration). It will make the multi-rotor feel "robotic", meaning very...

Hello Fltundra, Thanks for your advise, the props are well balanced I did make sure of that before flying, however I will double check just to make sure…. The motor mount level I did not checked, I guess I thrusted Xaircraft frame to be well align, I will check motor alignment and let you know...

Hello Motopreserve, Thanks for your advise, the props are well balanced I did make sure of that before flying, however I will double check just to make sure…. The motor mount level I did not checked, I guess I thrusted Xaircraft frame to be well align, I will check motor alignment and let you...

Hello Guys, I did some testing, and I need some advise, This is a smaller quad that I have, I have not yet done test with the big quad, but I will like to get this one tuned first, still working on the big one…. This is a X650 with SuperX, KDE 2814-775 with KDE ESC 35, 13x5 T-motor prop. I did...

Hello Guys, I did some testing, and I need some advise, This is a smaller quad that I have, I have not yet done test with the big quad, but I will like to get this one tuned first, still working on the big one…. This is a X650 with SuperX, KDE 2814-775 with KDE ESC 35, 13x5 T-motor prop. I did...

Hello FLTundra, I am going to do the update on the ESC's with the new firmware, I will post when I do some testing.

Hello FLtundra, Sorry for the late reply, I was traveling and could not get back to some "quad action"…..I have been doing some new tests, already double checked setup, props balance, and also I have another smaller quad, having same issues, I think that my problem is the KDE ESC that it is not...

Hello Guys, I wanted an advise on what ESC to use with KDE motors and SuperX,... what ESC other than KDE ESC's are recommended for this combination? I have read on this discussion that there has been know issues with KDE ESC's and SuperX, and some people were using T-motor… I have been doing...

Hello FlTundra, I do know what you are talking about, that is why I am asking for some interpretation, I want mine to look like yours, by the way they look pretty nice, I want to tune mine to make them look better. I am not sure if the problem is from the gains or if I have a problem with an ESC...

I also have the dubro, props are good.

I am using CF T-motor, I have a magnetic balancer., For motor alignment I used a rig with digital inclinometer. Any other ideas? thanks

Hello Guys, This are my gains: Roll 1.0 Pitch 1.0 Yaw 1.0 Height 1.3 on the futaba radio the gain knob is at +38 As you can see I did struggle to maintain altitude. My props are balanced and the motors are new, I am not sure how to balance the motors, but I guess they are balanced since they...

Hello Fltundra, No I am not a US rep for Xaircraft… I am just another SuperX user, I just need a little help to tune my system, and I was hopping to get some help here. Here are my logs, I hope someone can help me figure out what is causing my vibration problem. Logs...

Hello Guys, servers are now working, logs should work. Please let me know what you think I can tune. Regards

Hello DannyC You are right, the log is not working, it appears that the black box site is down or something is wrong…,I also can not see my logs... I will check later and post a new log. I am using a SuperX, not a MiniX. I also had to send back a MiniX that was not working out of the box, led...

Hello Guys, I need some help to determine what is causing a vibration on my quad. Could you please take a look to my log and tell me what you see is causing the vibration? I appreciate your help and input. Here are a couple of logs...