Search results

My wookong starts to drift to the right. I noticed it when i start its always drift to the right side. Also wenn i fly forward it slightly drift to the right side (Atti Mode). it is exactly the same problem i had some years ago with my NAZA-M Controller. i tried a lot of things but the only...

http://www.electronicarc.com/catalogo/product_info.php?cPath=43_49_71&products_id=453&osCsid=eb67e761cb5d196d3b79d64a162e79b4 Hi! Just one time used. Transmitter do not work with my receiver station - so i dont have any use for that. Removed plug from transmitter. (if big problem i could...

Helo! After a crash with my hexa xl with dji esc 30a opto, the only solution for me is to try out new esc. because Esc were running very hot all of the time even without payload... i think the crash was caused from a overheated hard shut down esc. So i already ordered these esc to use them on...

hi broken frame (Carbon) defective VideoTX propelleres etc... My setup: DJI NAZA MK3638 similar motors 13x6 Propeller Made already alot of flights with my FPV Copter. No problem at all. Even a full throttle test on ground was positive with 6x DJI 30A Opto ESCs 4S 13x6. But from time to time i...

Helo! made a test today with my hexa xl hovering 8min a 4S 6000mha battery with 1KG Payload and noticed after landing that DJI 30A ESc were really warm. Could not touch escs longer than 1 Second because of the hotness. Is this normal? OSD draws about 35Ampere Current for all 6 engines. 6Ampere...

helo! i noticed that when i flew with my hexa xl with naza and 6x DJI 30A ESC with 1,5KG Payload ESC are still not really warm. So i am aksing myself if anyone tried to power this esc up with 5S already? efficienty should be a lot better with 5S and 8000mha for a hexa xl with payload kopter...

hello! I am using 30A Opto Esc and asking myself what will happen if i overload DJI 30A ESC. Does this ESC support Option of reducing engine-power when overloaded? Or does it just burn-down or even stop totally? anyone who tried this out? thanks

hello i am not a multirotor beginner at all. i already have a octokopter from mikrokopter.de now working on a hexa xl with a dji naza brain. But there are some question where i cannot find any answer. 1) Orientation of Naza. where is front etc etc 2) does i have to make a acc calibration for a...

Helo! Does anyone know if they changed the motor cut off issue when throttle is under 10% in atti mode in the newer firmwire? In my Opinion this is a Great Risk and Bug... if planning a fast decend for instance... I want to know because my naza system is on the way :-) thanks for any reply

Helo! i made this musicvideo with a multicopter! Do you like it?