Search results

Yes sir, 14sg.... but even with an end point adjustment when running single operator will you still get it to stop as the zenmuse u need to move the gear dial one click back and let the controller beep to get it to set an end point for the zenmuse. Let me know your thoughts.

Would anyone be so kind to answer this: If running A2 single operator with a zenmuse gh4 with the new update can you adjust the travel limit for tilt? As before if using the slider on a 14SG you were stuck with the -140 to +50 range.... which for a single operator seems a bit much! Would be...

Rilot.... thats 100% what we need for ALL operators here in the USA... newbie phantom pilots included.

Listen I'm all for some type of license and regulation, but a pilots licenses hardly relates. FAA ground school so people can learn about regulations, airspace, and whatnot for sure. But really it should be across the board, it's like when Jet Skis first came about, people were crashing into...

100% agree everything looks great!! Nice work!!

Agree with you... up until the pilots license... ground school maybe, but really can't see what the need for a full pilots license is.

heard it was 2800 or so but did anyone catch what it was for the second controller?

I'm with Sleepy... my rig is flying perfect I'm scared to update anything! The banked turns sound cool but IDK how I feel about the "home fence" and "Added flight limits and airport No-Fly Zones" Hmmm......

On my second unit and now with the latest updates have been flying trouble free. Only issues people seem to have are with the shutter control when shooting photos, however for video everything is working fine. Cheers-

Allbread. You will love the 900 its a great rig. A futaba will directly communicate with the a2 system without an additional receiver like you would need with your JR. Its nice and simple to setup. And yes, the C rating is something to pay attention to. If you go with the iosd mark 2 and a...

Ed, where and how do you adjust this? Thanks in advance for the info as I know you always have all the answers and steps :)

Wanted to share a low light test. Shot at 2.7k medium/48fps on the Hero 4 Black... pretty impressed over the 3+, let me know your thoughts:

Yup, I'm using it on a phantom 2, with the version of the H3-2d that has the connector going into the hdmi as opposed to the 30 pin. For video downlink I'm using a flyweight black pearl monitor and a 32 channel downlink setup. Running the TS832 from Aerial Media Pros. Its also paired with the...

Running a H3-3D and GoPro 4 black... no light bridge and tested 4k, 2.7k, 1080, the new 120 frames 1080 and all settings worked fine. OSD mini and all video acting just as it should! Will check and see which version I have so I can update everyone. Cheers- Mike

Looks pretty spot on! Really learning to use full manual isn't all that hard and will give the best results. One quick note however you might want to add is to try to keep the ISO as low as needed and I always try to use 200 and just adjust other settings or use a filter. And just out of...

Hey guys I posted this video a ways back and wanted to give an update, I was running 1.4 firmware and since going to 1.8 have been problem free! Hope that helps some other users. I'm running my GH4 with an A2 flight controller and the update specifically says it addresses the involuntary pan...

Yes you can do it but a few things you should do... turn off all the extra servos after you create and name the new model, and then check that you have the reverse settings done right. Most ppl use A2 to do the swap on the sticks around, but you can't do it in the phantom software so you need...

looks like it didn't change size so should be comparable with all the gopro gimbals out there!

SIT TIGHT!!! working on cutting some stuff in 4k as I said. Lots of clips to sort through its been a busy week flying this thing!

Hey guys, Just thought I would share a quick video of one of my early flights with my S900 and GH4. Some cool 240 frames per second stuff in there. Will post some aerial clips but just wanted to share this quick cut so you could see the copter in action. Super impressed so far with the airframe.