Search results

None of them, I don't have a FCC ID why should I ? I'm living in Europe so this is quite useless to me. (on top of that Europe and US models don't have the same specs/settings)

Cannot read the pdf from the link...

Thanks Shahar... The sooner the better. ;)

Hi Ricardo, as said, just take a cutter knife and gently (very gently) shave it until it passes without touching the gimbal. it's a pain to have to do that but it seems to be the quickest solution. I did it on mine, it's just fine. Then you can concentrate on the next problem... Initialisation...

Some have reported farther distances... 600 and 750m if I recall.

I have the connex. No latency. :)

I Second that!

http://www.globe-flight.de/Amimon-CONNEX-Latency-free-5GHz-Full-HD-Wireless-Video-System-with-SBUS-for-Gimbals-Groundend From what I heard the ground unit alone will be available later.

I use a feelworld 7" with 5.8 receiver integrated. first try I couldn't get the HDMI video signal, the connex was displaying "Video not detected". There is a "camera" button on the feelworld, been pressing it and the video came... (???) I guess what comes out of the GH4 is not always directly...

Not a hero for me (a GH4) but both co-exist and no trouble. On the 900, the 2 transmitters are about 20cm apart, and I don't have any problem. However, I noticed that if the receivers were too close to each other, I was loosing the connex. Amimon recommends to keep them as far apart as possible...

Good news about the HDMI cable wrapping around the Z15 when initialising and moving the GH4, e-copter.com is about to release a system to install at the back of the gimbal that just remove the problem! Pls check it here: https://www.facebook.com/ecopterfr

Was the distance I was about too, I hit 200m, perfect picture. Don't feel like going too far anyway. Really please with the result.

Me too, fantastic picture at all times. Were you far?

Still 250m range or did you change the settings?

Nice initiative, and a another use for the camera. Good Job!

This is great thank you, because as you may know, DSLRPros refuses to sell their kit to clients who bought their Connex somewhere else. I hope yours will be ready soon. Thank you for the info.

Hi Shalar, glad to know you are working on a solution but could you clarify? I'm not sure to understand, I am talking about the hdmi output cable of the GH4, and you answer with an Sbus connection video demo... (?) Our problem is simple: The gh4 hdmi cable is wrapping itself around the gimbal...

Can you please explain that to me ? If you're talking about attaching the connex to the Z15 ok, but what about power? what about installing the antennas at 2 inches from the air unit, correctly positioned? If you have the solution thanks to let me know, because so far I don't know how to solve...

yes,DSLRPros have a mounting kit for the Z15, allowing unlimited movements of the camera, but they sell it only to people who buy their Connex kit from them. I don't know if it's a good or bad news for the rest of us who bought it somewhere else, but this is what I was told and reconfirmed by...